Blocks ONE MKII, Руководство пользователя

Страница: 52 / 110

PRO S30 USER GUIDE MANUAL DE UTILIZAÇÃO 52
Maintenance
05
Cleaning and maintenance of the extruder
Throughout the usethe extruser will accumulate filament residues that must be cleaned
to ensure optimum traction of the pinion. To clean the pinion the operator must ensure
that there is no filament loaded in the machine. Then unscrew by hand the lateral screw of
the extruder that contains the spring and after open completely the hinge so that the two
gears become exposed. Then, with a steel brush or sharp object, remove all the plastic parti-
cles that are inside.
After the cleaning procedure close the hinge e put the screw and the spring on the original
place.
05.6
05.4 Rod lubrication
To lubricate polished rods, the operator must place two to three drops of machine oil on
each rod. To lubricate the threaded trapeze rod that causes the print platform to move ver-
tically, a little grease must be applied.
05.6 Belt tensioning
First lift the metallic tab (1) and then by pushing the belt adjust the tension (2) and then
insert the metallic tab back into place.