Blockaudio LINE BLOCK, Руководство пользователя

Страница: 15 / 21

15
SETTINGS Menu
Move the cursor to the desired position, select and then adjust value/option according the table below.
SETUP Menu
STANDBY
BATTERY
POWER AMP…
SETTINGS >
CANCEL
SETTINGS OPTIONS DEFAULT
CLASS
1)
A-ECO / A / ECO A-ECO
BALANCE Right -20 dB to Left -20dB L = R
PHASE L/R 0° / Left 180° / Right 180° / L/R 180° L/R 0°
AUTO STANDBY OFF / 0.5 h / 1 h / 3 h OFF
ADVANCED > Moves to the ADVANCED SETTING Menu None
CLASS
1)
: This option lets you control the operation mode of the Mono Block. See Mono Block Owner’s Manual
for more details.
BALANCE: This setting lets you adjust Left-to-Right channel balance
PHASE: This setting lets you change the phase between the Input and Output audio signal.
AUTO STANDBY: This setting lets you adjust the timer that the preamplifier/system turns off during inactivity.
(no audio signal, and no user control input).
ADVANCED SETTING Menu
Move the cursor to the desired position and select option according the table below.
SETUP Menu
STANDBY
BATTERY
POWER AMP…
SETTINGS >
CANCEL
SETTINGS
CLASS
BALANCE
PHASE
AUTO STANDBY
ADVANCED >
ADVANCED OPTIONS DEFAULT
INPUTS > Moves to INPUTS Menu None
DISPLAY > Moves to DISPLAY Menu None
VOLUME > Moves to VOLUME Menu None
PAIR REMOTE PAIR / UNPAIR REMOTE PAIR REMOTE
FACTORY RESET Factory Reset menu None
PAIR REMOTE: This option lets you Pair / Unpair your Block Remote with the Line Block. After the selection, the
instructions for Pair / Unpair will be displayed.
FACTORY RESET: This option lets you return all default values. After the selection, the Factory Reset menu will
appear.
1)
Appears only when Block Audio Mono Blocks are installed in the system.