22
23
The Block Multi-room Concep
Together with the purchase of your SB-50 MKII, you have also purchased a multi-function loudspeaker, which
can play the sources USB, DAB + radio, VHF radio, Internet radio, Spotify and an isolated DLNA media.
Additionally, the loudspeaker with a others SB-50 MKII or with our Multi-room Basic units can be summarised
to a multi-room system, allowing you to listen to the same music simultaneously throughout the house, as
well as the sources of the base units, e.g. CD or record player at any time in all rooms of your house.
Besides, the entire control and configuration of this multi-room system is easy and convenient via the free
„UNDOK ™“ Smartphone app which is available for iOS and Android in the respective stores.
The Block Multi-room system supports up to five separate rooms and is available through the whole house, as
long as an adequate WLAN reception is ensured in the respective rooms.
Connections to the device (back)
TUNER ANTENNA
DC INPUT
DC 16V 1,8A
1
2
1.
Connect the power cable, please make sure that the cable is not damaged and use only the power trans-
former supplied with the unit.
2.
Antenna connection for the included DAB + | FM wire antenna
Controls on the device (front)
1.
USB input: for connecting a USB stick
2.
Infrared remote control sensor
3.
Status LEDs
Green LED: lights when the SB-50 MKII is configured as the left channel of a stereo system.
Red LED: lights when the SB-50 MKII is configured as the right channel of a stereo system.
Red & Green LED: lights when the SB-50 MKII is configured as a single stereo speaker.
Blue LED: flashes in the setup mode.
Lights permanently up during network connection.
Off if the network connection is missing.
4.
„Minus“ button: decreases the volume.
5.
„Plus“ button: increases the volume.
6.
„Source“ button: switches to the next audio source.
7.
Channel button: controls the operating mode of the SB-50 MKII. Are available: left channel, right channel
and single stereo system. Observe the Status display of the red and green LED.
8.
„Standby“ button: short pressure switches the SB-50 MKII into standby mode. Pressing for more than 3
seconds returns all settings to their factory settings. After this, the SB-50 MKII is on the setup mode.
9.
Lighting: the keys 5 -9, when operated, are lighted up in white and thereby also clearly visible behind the
fabric. The light goes out after approximately five seconds of inactivity.
USB
–
+
S
C
1
2
4
5
6
7
8
9
3
Содержание SB-50 MKII
Страница 1: ...1 SB 50 MKII Bedienungsanleitung Manual ...
