Block CVR-100+ MKII, Инструкция по эксплуатации

Страница: 21 / 35

21
Chapter 7
Internet radio
5. DNS
Now set the primary and secondary DNS address with „ and „ or with the „C ONTROL dial
“ “ “ .
S T
Use the „
u
“
and „
t
“ . “ .
buttons to switch between felds Press „ENTER t o switch to the next feld
For beyond a network:
6. SSID
Set the wireless network identifcation Use the navigation buttons or the „CONTROL dial to
. ”
move the cursor through the displayed characters Press either the „ENTER button or the „C ON
. ” -
TROL dial t o confrm the selected character
” .
› Select „BKSP to delete the last character selected
“ .
› Select „C ANCEL t o cancel your input.
“
› Select „OK“ to confrm the entered code and to try to establish a connection to the selected
network
.
7. Authentication
Now set the preferred method of authentication
.
Open Pre Shared Key PSK WPA Wi Fi Protected Access or WPA2
, - ( ), ( - ) .
8. Encryption type
Now select the appropriate encryption type
.
Disabled of or WEP Wired Equivalent Privacy for Open or PSK TKIP Temporal Key Integrity
( ) ( ) , (
Protocol or AES Advanced Encryption Standard
) ( ).
9. Key
Now enter the code for the wireless network Use the navigation buttons or the „CONTROL dial
. ”
to move the cursor through the displayed characters Press either the „ENTER button or the
. ”
„CONTROL dial to confrm the selected character
” .
› Select „BKSP to delete the last character selected
“ .
› Select „C ANCEL t o cancel your input.
“
› Select „OK“ to confrm the entered code and to try to establish a connection to the selected
network
.
Now the device will try to establish a connection using the data previously entered
.
4. Gateway address
Set the Gateway address with „ and „ or with the „CONTROL dial Use the „
“ “ “ .
u
“
and „ t
“
buttons to switch between fields Press „ENTER t o switch to the next field
. “ .