Block CVR-100+ MKII, Инструкция по эксплуатации

Страница: 19 / 35

19 Chapter 6
Connecting to a network
› You will need a network connection for „I nternet radio or „M usic player operation modes
“ “ .
› You will need either a router and RJ45 cable or a W-LAN router together with the required pass
-
word to establish a connection to your network
.
› Your router must have a broadband internet connection for internet radio operation and to
perform software updates
.
› When you select and „I nternet radio or „M usic player mode your device will try to connect to
“ “ ,
a network If this is the frst time that a connection has been made or stored networks are not
.
accessible then the „Network Wizard will start To start the „Network Wizard manually select
, ” . ” ,
the following
:
MENU › System settings › Network › Network Wizard
Once started you can enter the following information
:
› W-LAN region select a country select a region from the list
( / )
› Network name (select the desired network)
› An encrypted wireless network will require a password
.
› Use the navigation buttons or the „CONTROL dial to move the cursor through the displayed
”
characters Press either the „ENTER button or the „CONTROL dial to confrm the selected cha
. ” ” -
racter
.
› Select „BKSP to delete the last character selected
“ .
› Select „C ANCEL t o cancel your input.
“
› Select „OK“ to confrm the entered code and to try to establish a connection to the selected
network
.
› The unit will return to the password entry window if no connection could be made
, .
› Under the menu options MENU › System settings › Network › Network Profle you will not be
able to delete desired networks
.
Connecting to a network