Page 4
Stiletto™ Z7 Moving Head - Rev. A
(c) 2015 Blizzard Lighting, LLC
SAFETY INSTRUCTIONS
Stiletto Z7 fixtures are fitted with 7 plano-convex lenses in a highly efficient col-
limator cluster. This type of lens can act as a strong magnifying glass.
If the rays from a strong light source (such as the sun or
another lighting fixture) are directed towards the front of this
fixture, internal damage is possible. In a worst case scenario
with a high power light source, internal damage can happen
very quickly, potentially melting components or causing an
internal fire within seconds.
Please adhere to the following requirements:
• This product is intended for indoor use only. Do not expose
the front of a fixture to direct sunlight or any other strong light sources.
• Make sure that you are connecting to the proper voltage, and that the line voltage you are
connecting to is not higher than that stated on the decal or rear panel of the fixture.
• To prevent risk of fire or shock, do not expose fixture to rain or moisture.
• Make sure there are no flammable materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least 20in (50cm)
from adjacent surfaces. Be sure that no ventilation slots are blocked.
• ALWAYS disconnect from the power source before servicing or replacing fuse and be sure
to replace with same fuse size and type.
• ALWAYS secure fixture using a safety cable.
• NEVER carry the fixture by its head.
• DO NOT operate at ambient temperatures higher than 104°F (40°C).
• In the event of a serious operating problem, stop using the unit immediately.
• NEVER try to repair the unit by yourself. Repairs carried out by unskilled people can lead
to damage or malfunction. Please contact the nearest authorized technical assistance center.
Always use the same type spare parts.
• NEVER connect the device to a dimmer pack.
• Make sure the power cord is never crimped or damaged.
• Avoid direct eye exposure to the light source while it is on.
Caution!
There are no user serviceable parts inside the unit. Do not open the housing or at-
tempt any repairs yourself. In the unlikely event your unit may require service, please open
a support ticket at www.blizzardlighting.com/tickets.
