manualshive.com logo in svg

Blizzard Lighting snokontrol, Руководство пользователя

Поделиться
Скачать
Blizzard Lighting snokontrol Скачать руководство пользователя страница 4

SNOKONTROL Manual Rev B.

Page 4

Copyright © 2010-2013 Blizzard Lighting, LLC.

ALL RIGHTS RESERVED

1. GETTING STARTED

1.1 What’s In The Box?

• 

1x SNOKONTROL™ DMX Controller

• 

1x 12 VDC, 500ma AC/DC Adaptor

• 

A Warranty Card & Warranty Info

• 

This Lovely User Manual

1.2 Getting It Out Of The Box

 

We could tell just by lookin’ atcha.  You’re a bit of a control freak, aren’t ya?  Just kidding!  CON-

GRATULATIONS!  You’ve purchased a GREAT little DMX controller!  Bravo!  Now that you’ve got 

your SNOKONTROL™, you should carefully unpack the box and check the contents to ensure that 

all parts are present and in good condition. If anything looks as if it has been damaged in transit, 

notify the shipper immediately and keep the packing material for inspection.  Again, please save 

the carton and all packing materials. If a fixture must be returned to the factory, it is important 

that the fixture be returned in the original factory box and packing.

1.3 Powering Up!

 

All fixtures must be powered directly off a switched circuit and cannot be run off a 

rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel 

is used solely for a 0% to 100% switch. 

 

AC Voltage Switch - Not all fixtures have a voltage select switch, so please verify that the fixture 

you receive is suitable for your local power supply.  See the label on the fixture or refer to the 

fixture’s specifications chart for more information.  A fixture’s listed current rating is its average 

current draw under normal conditions. Check the fixture or device carefully to make sure that if 

a voltage selection switch exists that it is set to the correct line voltage you will use. 

Warning! Verify that the voltage select switch on your unit matches the line voltage 

applied. Damage to your fixture may result if the line voltage applied does not match 

the voltage indicated on the voltage selector switch. All fixtures must be connected to 

circuits with a suitable Ground (Earthing).

1.4 Getting A Hold Of Us

If something is wrong, just give us a call or send an email.  We’ll be happy to help, honest. 

 

Blizzard Lighting

W220 N1531 Jericho Ct. Suite E, Waukesha, WI 53186 USA

[email protected]  |  Phone: 866-493-6025

www.blizzardlighting.com 

Содержание snokontrol





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды