Blizzard Lighting snokontrol Скачать руководство пользователя страница 10

Страница: 10 / 20

SNOKONTROL Manual Rev B.

Page 10

3.1.4 Resetting The System

WARNING:

This will reset the controller to its factory defaults. ALL PROGRAMS AND SETTINGS

WILL BE ERASED!

Turn the unit off.

Press and hold

<BANK UP>

<AUTO/DEL>

Turn the unit on while you continue to hold

<BANK UP>

<AUTO/DEL>

The settings will be reset to factory defaults.

3.1.5 Fixture Copy

This allows the user to copy the attributes of one fixture to another (IE Scanner 1 to Scanner 2)

Press and hold the

<SCANNER>

button to be copied.

While holding the first button, press and hold the

<SCANNER>

button to receive

the copied data.

Release the first

<SCANNER>

button, then the second.

The Scanner LED indicators will flash to confirm a successful copy.

3.1.6 Fade Time Assign

This allows the user to assign fade times either globally or to PAN/TILT channels only. This is

useful because typically the user will not want to fade gobos/colors/etc.

Turn the controller off.

Hold the

<BLACKOUT>

and

<TAPSYNC DISPLAY>

buttons simultaneously.

Turn the controller on.

Press the

<TAPSYNC DISPLAY>

button to toggle between the two modes. Either

all channels (

) or PAN/TILT channels only (

Press

<BLACKOUT>

and

<TAPSYNC DISPLAY>

to save the setting. All LEDs

will blink to confirm the selection.

3.2 Manual Mode

Manual mode allows direct control of all scanners. You are able to move them and change attri

butes by using the channel faders.

Note: All changes made while in Manual Mode are temporary and will not be recorded.

Press the

<AUTO DEL>

button until the Auto Trigger LED is unlit.

Select a

<SCANNER>

button.

Move the faders to change fixture attributes corresponding with each fader channel.

Pressing the

<TAPSYNC DISPLAY>

button toggles between displaying the DMX

value (

0-255

) and percentage (

0-100

)

Содержание snokontrol




















Результаты поиска

Содержание snokontrol

Отзывы:

Бренды по названию

Популярные бренды

Blizzard Lighting snokontrol, Руководство пользователя

Результаты поиска

Содержание snokontrol

Отзывы:

Бренды по названию

Популярные бренды