Blizzard Lighting Puck Q6 Unplugged Скачать руководство пользователя страница 3

Page 3

The Puck Q6: Unplugged Manual Rev. A 

 

Copyright (c) 2012 Blizzard Lighting, LLC

LITHIUM-ION BATTERY WARNINGS & INFO

 

1.  CAUTION!  TO REDUCE THE RISK OF INJURY AND/OR 

EQUIPMENT DAMAGE, DO NOT TAMPER WITH THE CHARGING CIR-

CUITRY IN THIS FIXTURE.  

The use of other types of chargers may result 

in personal injury or equipment damage.  Under no circumstances attempt to 

connect the battery pack to any power supplies or other equipment that is not 

specifically and expressly designated for use with this model 

battery pack. 

2.  USE THE LITHIUM ION BATTERY PACK ONLY WITH EQUIPMENT SPE-

CIFICALLY AND EXPRESSLY DESIGNATED FOR USE WITH THIS MODEL 

BATTERY PACK. 

 Use with other equipment may result in fire, electric shock, 

personal injury, and/or damage to equipment. 

3.  AVOID DANGEROUS CONDITIONS AND ENVIRONMENTS. 

 Do not 

charge the battery pack in damp or wet conditions.  Avoid using the pack in 

direct exposure to rain or snow.  Do not use the battery pack or charger in the 

presence of explosive gases or flammable materials.

4.  AVOID USING OR STORING THE BATTERY PACK IN EITHER 

EXTREME COLD OR EXTREME HOT TEMPERATURES.  

The battery pack 

will disable itself under conditions of extreme heat (above 60 °C) and may not 

function to full performance under conditions of extreme cold (below –20 °C).  

Storage at elevated temperatures (above 25 °C) will shorten the life of the bat-

tery pack.

5.  DO NOT BURN OR INCINERATE BATTERY PACKS. 

 Battery packs 

may explode causing personal injury, fire, and/or damage.  Fumes 

resulting from burning of battery packs may be toxic. 

6.  DO NOT DROP, CRUSH, IMPACT, OR MECHANICALLY ABUSE 

BATTERY PACKS.  

Cease use of fixtures that have suffered a sharp 

impact, been dropped, run over, or damaged in any other way.  Such 

impacts may cause internal damage that is not externally visible and 

that, over time, may cause short circuits, battery cell leakage, or other 

events that may lead to fire, personal injury, and or equipment damage. 

7.  DO NOT DISASSEMBLE BATTERY PACK. 

 There are no user 

serviceable parts within battery packs.  Disassembly may result in short 

circuiting or other damage that may cause fire, personal injury, and/or 

other damage. 

8.  AVOID CONTACT WITH BATTERY CHEMICALS.  

If a battery pack 

leaks battery chemicals, avoid any contact with skin, eyes, or mouth.  In 

the event of contact with skin, wash immediately with soap and water 

and rinse with vinegar.  For eye contact, begin flushing with clean water, 

immediately call for medical help, and continue flushing for 20 minutes or 

until medical help arrives. 

exceptions. 

11.  STORE IN A COOL, DRY PLACE.  

Avoid leaving the fixture in direct sun

-

light, vehicle cabs, compartments, or unventilated storage buildings during hot 

summer conditions.  Under extreme temperature conditions damage may occur.  

Elevated temperatures in general shorten the life of your battery pack.

Содержание Puck Q6 Unplugged





















Отзывы: