Page 6
LightCaster W-DMX IP Manual Rev. A
Copyright © 2018 Blizzard Lighting, LLC
Resetting the Unit(s)
1. Press and hold the transmitter
function button for 5 seconds. The
transmitter will disconnect from all receivers. The DMX LED indicators on
the receivers will then be turned off.
2. Press and hold the each receivers
function button for 5 seconds. Each
receiver will disconnect from the transmitter, and its DMX LED indicator
then will be turned off.
Point-2-Point Operation
Basic Point-2-point systems are used when you want to send wireless DMX
data from a console to a single receiver. As the receiver accepts all 512
DMX channels from the transmitter, you can easily daisy chain more fix
-
tures by cable from the fixture with the wireless connection.
Multipoint-2-Multipoint Operation
Up to 16 universes of DMX can be transmitted simultaneously using a
multipoint to multipoint approach. All receivers in a multipoint system will
listen only to the designated transmitter without any delays or interference
from the systems working alongside.
Need more receivers?
Pair as many receivers as you like with any transmitter, assigning them
with a simple button push.
Possible Configurations
The diagrams below show possible configurations. Multiple receivers may be
used in any possible configuration.
Tx
Rx
Rx
Tx
Rx
Rx
Tx
Rx
