Page 5
LightCaster W-DMX IP Manual Rev. A
Copyright © 2018 Blizzard Lighting, LLC
3. OPERATION
Function LED Indicator
The function LED indicator will display the units current status or mode. If
the LED is ON it is in receive mode, if it is OFF it is in transmit mode.
1. Set the unit as transmitter or receiver:
Receiver:
•
With the power off, hold in the function button
•
Turn on the power. After 1s the function led turns OFF
•
It is now set as receiver
Transmitter:
•
When in receiver mode, press the function button
•
After 1s the function led turns ON
•
It is now set as transmitter
LED indicator status:
•
LED Off: Receiver - DMX OK
•
Flash every 1.5s: Transmitter off
•
Flash every 1s: Transmitter on, no DMX signal
•
Flash every 0.2s: Searching for receiver
•
LED On: Transmitter - DMX OK
Setting Up
1. One transceiver with multiple receivers:
Power on all units. The DMX LED indicators on all units should be off
(if some DMX LED indicators are on or are flashing, press & hold the
function button until they turn off), then press the transceivers func
-
tion button again. All the receivers should flash quickly, and then all be
matched up correctly.
2. Multiple transceivers, multiple receivers; e.g. 3 groups consisting of a
transceiver & receiver(s) named A, B, and C:
1.) Turn power off of all units.
2.) Group “A” gets powered on, then follow step 1 above.
3.) Group “B” gets powered on, then follow step 1 above.
4.) Group “C” gets powered on, then follow step 1 above.