BlitzRotary Master Gear 1, Руководство по эксплуатации

Страница: 10 / 41

Operating Instructions
7
3 Taking into use.
For technical details see dimension sheet in appendix
3.1 Setting up / Assembly / Connecting Up.
The drawbar must be assembled before start-up.
•
Position the lift-truck on a firm, level surface.
•
Always follow the instructions, when assembling the equipment.
•
Danger of stumbling because of cable.
•
Damage to cable, e.g. because of falling
objects (tools etc.)
•
It is forbidden to wind the cables around
mechanical components
•
Have you read the operating instructions and above
all the safety points and above all understood them?
Then you can take the machine into use
3.2 Taking into use.
•
Produce the electrical connection (put the plug in)
•
Check the motor rotation (by three phase 400V)
- Control by use of the red arrow on the motor casing
- when incorrect alter by changing the phases in the
plug (electrician only)
•
Now you can take the machine into use.
An adequate and safe connection of the earth cable to the
workpiece must be guaranteed when using a lifting table as a
welding station.
Danger
Every feed wire must
be secured by 16 A.