USER MANUAL EN
11
Reversing the door
The side at which the door opens can be changed,
from the right side (as supplied) to the left side, if
required.
Warning! When reversing the door, the appliance
must not be connected to the mains. Ensure that
the plug is removed from the mains socket.
Tools you will need
Not provided
8mm socket
wrench
Thin-
blade
SCIBNdriver
Putty knife
Cross-
shaped
screwdriver
Monkey
wrench
8mm wrench
Additional parts (in the plastic bag)
Left Hinge Cover
Note: If required you may lay the refrigerator on its
back in order to gain access to the base, you should
rest it on soft foam packaging or similar material to
avoid damaging the backboard of the refrigerator.
To reverse the door, the following steps are
generally recommended.
1.
Stand the refrigerator
upright. Open the upper door to take out all door
racks (to avoid damage) and then close the door.
Removable door shelf
2.Use a putty knife or thin-blade screwdriver to prize
the screw hole cover which is at the top left corner
of the refrigerator, and the upper hinge cover which
is at the top right corner of the refrigerator
.
3.Unscrew the special flange self-tapping screws
which are used for fixing the right upper hinge part
by a 8mm socket driver or a spanner (please support
the upper door with your hand when doing it) .
4.Remove the upper hinge axis, transfer it to
reversed side and tighten securely
,
then put it in a
safe place
5.Remove the upper door from the middle hinge by
carefully lifting the door straight up.
NOTE:
When removing the door, watch for
washer(s) between the center hinge and the bottom
of the upper door that may stick to the door. Do not
lose