Assembly and Operating Manual
4
Fig. 2
- Locate the fuselage and nose cone
Fig. 5
- Remove any excess glue and hold in
position until the glue sets. The photo shows the
finished view.
Fig. 3
- Glue the nose to the front of fuselage (glue
not included).
Fig. 6
- Glue the main wheel fixed plate to the slot
on one half of the main wing panel (the white mark
shown the slot).
Fig. 4
-
Glue the horizontal stabilizers to the slots at
the rear of the fuselage (glue not included).
Fig. 7
- Make sure there is no glue in the slot for the
main wheel. Remove any excess glue on the wing
and plate surface.
