Assembly and Operating Manual
Fig. 35
-
Checking the model’s balance
- Place the flight battery in its compartment without connecting.
- Mark the Center of Gravity (CG) on both sides of the fuselage;
the position is shown in the photo.
- Support the model at the marked points and allow it to hang
freely. When correctly balanced the airplane will remain
horizontal with the nose slightly down.
- If necessary, adjust the position of the flight battery to achieve
the correct CG.
- Mark the battery location in the fuselage, so that you can be
sure of positioning it correctly after recharging.
- Pack scrap pieces of foam around the battery in its final
position, otherwise there is a danger of it shifting in flight and
altering the model’s balance.
- Charge the flight battery and the model is ready for flight.
Fig. 36
-
Access to the ducted fan unit and electronic speed
controller
- The ducted fan unit is accessible from underneath, if you need
to carry out maintenance work or repairs.
- Ensure that the wire colors match correctly.
11
