IF YOU PURCHASED A GRAVITY FREE RECLINER WITH A DRINK TRAY AND/OR PILLOW, SEE BELOW FOR INSTALLATION INSTRUCTIONS. PLEASE NOTE
THAT THE RECLINER, DRINK TRAY AND/OR PILLOW PICTURED BELOW MAY DIFFER IN STYLE AND/OR COLOR FROM WHAT YOU HAVE PURCHASED.
GRAVITY FREE RECLINER: DRINK TRAY & PILLOW INSTRUCTIONS
DRINK TRAY INSTRUCTIONS
*NOTE: BUNGEE CORD SHOULD BE IN A PLASTIC BAG WITHIN THE PLASTIC BAG CONTAINING THE PILLOW
PILLOW INSTRUCTIONS
TROUBLESHOOTING SECTION:
How to adjust lock tension, if needed
With recliner opened, place drink tray on left side of recliner
underneath armrest. (IMAGE 1)
Tilt the wide opening of the drink tray up and attach it between
the 2 meeting poles. (IMAGE 1)
Start to slide drink tray down until it cannot be pushed down
anymore. (IMAGE 2)
Press firmly to ensure cup holder is securely in place. (IMAGE 2)
1.
2.
3.
4.
1.
2.
3.
IMAGE 1
IMAGE 2
IMAGE 1
IMAGE 2
IMAGE 3
Thread bungee cord* through eyelid of pillow. (IMAGE 1)
Make sure canopy is unsnapped and brought to front of
chair. Bring pillow around the front (IMAGE 2)
Make sure the flat part if the pillow is resting above the
snap holders and flat against the fabric of the chair.
Thread other end of bungee cord through the pillow’s
eyelid. (IMAGE 3)
CAUTION:
REMOVE THE DRINK TRAY BEFORE FOLDING YOUR RECLINER. IF THE RECLINER IS FOLDED WITHOUT DOING SO, THE DRINK TRAY WILL BREAK. UNLOCK THE TWO LOCKING
MECHANISMS THAT ARE UNDER THE ARMRESTS BEFORE FOLDING YOUR RECLINER. IF RECLINER IS FOLDED WITH OUT DOING SO, THE LOCKING MECHANISM WILL WEAR.
