Blink J1939, Руководство пользователя

Страница: 8 / 16

Via Montefeltro, 6 – 20156 Milano (MI) – Italy - 8 -
Tel. +39 (02) 3088583 – Fax +39 (02) 33406697
www.blinkmarine.com – info@blinkgroup.com
FOR REFERENCE ONLY
Example:
Direction Identifier Format Message Data
To
Keypad 18EF2100h Ext 04 1B 28 01 FF FF FF
FF Startup keys message
enabled
10. Get software revision (2Ah)
Byte 0 04h Header bytes
Byte 1 1Bh
Byte 2 2Ah Get software revision
Byte 3,7 FFh Not used
Answer:
Byte 0 04h Header bytes
Byte 1 1Bh
Byte 2 2Ah Get software revision
Byte 3,6 XXh XXh XXh XXh SW revision ASCII
Byte 7 00h Not used
Example
Direction Identifier Format Message Data
To Keypad 18EF2100h Ext 04 1B 2A FF FF FF FF
FF Get software
revision
From
Keypad 18EFFF21h Ext 04 1B 2A 56 32 2E 31
30 V2.10
11. Set startup LED show (34h)
Byte 0 04h Header bytes
Byte 1 1Bh
Byte 2 34h Set startup LED show
Byte 3 XXh XX:
00h OFF
01h Complete LED show (default)
02h Fast flash
Byte 4,7 FFh Not used
12. Baud rate setting (6Fh)
This message is used to change the baud rate of the CAN bus. Connecting only one
keypad to the bus when changing the baud rate is recommended. If an invalid value
is chosen, then no change is done to the stored value.
Byte 0 04h Header bytes
Byte 1 1Bh
Byte 2 6Fh Baud rate setting
Byte 3 02h 500kbit/s
03h 250kbit/s
Example
Direction Identifier Format Message Data
To
Keypad 18EF2100h Ext 04 1B 34 00 FF FF FF
FF Set Startup LED
show OFF