Blink J1939, Руководство пользователя

Страница: 7 / 16

Via Montefeltro, 6 – 20156 Milano (MI) – Italy - 7 -
Tel. +39 (02) 3088583 – Fax +39 (02) 33406697
www.blinkmarine.com – info@blinkgroup.com
FOR REFERENCE ONLY
To Keypad 18EF2100h Ext 04 1B 01 02 07 03 03 FF LED key2 blinks
white and blue in
alternate mode
Set LED indicators brightness level (02h)
This message sets the value of the LED indicators brightness level. The value can be
set from 0 to 3Fh (min-100%) of the LED dimming range.
NOTE: this setting has temporary effect and at the startup comes back to the
default value. If the default value is desired to change, please refer to the
Command
7Ch .
Byte 0 04h Header bytes
Byte 1 1Bh
Byte 2 02h Set LED indicators brightness level
Byte 3 XXh XX: Dim Value (default 3Fh)
From 00h (min) to 3Fh (100%)
Byte 4,7 FFh Not used
Example:
Direction Identifier Format Message Data
To Keypad 18EF2100h Ext 04 1B 02 2F FF FF FF
FF Brightness level set
to 75%
8. Set backlight level (03h)
This message sets the value of the backlight brightness. The value can be set from
0 to 3Fh (0-100%) of the brightness range.
NOTE: this setting has temporary effect and at the startup comes back to the
default value. If the default value is desired to change, please refer to the
Command
7Bh .
Byte 0 04h Header bytes
Byte 1 1Bh
Byte 2 03h Set backlight level
Byte 3 XXh XX: Value (default 00h)
From 00h (0%) to 3Fh (100%)
Byte 4,7 FFh Not used
Example:
Direction Identifier Format Message Data
To
Keypad 18EF2100h Ext 04 1B 03 20 FF FF FF
FF Backlight level set to
50%
9. Set startup keys message(28h)
This command enables the transmission of the state of the keys during power up.
Byte 0 04h Header bytes
Byte 1 1Bh
Byte 2 28h Set startup keys message
Byte 3
XXh XX:
00h Disabled (default)
01h Enabled
Byte 4,7 FFh Not used