Blink Marine PK-1400, Руководство пользователя, Страница: 16 / 16

Via Montefeltro, 6 – 20156 Milano (MI) – Italy - 16 -
Tel. +39 (02) 3088583 – Fax +39 (02) 33406697
www.blinkmarine.com – info@blinkgroup.com
PK-1400_J1939_UM_REV1.2
APPENDIX: DEMO Mode instructions
In DEMO Mode you can try the following functions by pressing buttons on the PK1400.
Entering this mode, you turn on key-LEDs with color red.
For the key 1, each time you press the button you can change the color of key-LEDS with
this sequence:
1. Green;
2. Color 03
*
;
3. Color 04
**
;
4. OFF.
For the key 4, each time that you press the button, there are different steps in this
sequence:
1. Complete LED show of all colors: at first with red, then green, color 03
*
, and at the
end color 04
**
;
2. Turning on/off each single key-LED with the possibility to change color pressing key
1;
3.
Pause step 2;
4. Return to the starting demo mode state.
If you press the other keys, you have no effect.
25. Revision history
Date Manual
Revision
Comment Related SW
version
03/02/2017 1.0 First Release
23/11/2017 1.1 Second Release
- Replaced 0% with min value for LED
brightness
- Corrected heartbeat generated message
with exact number of keys
- Updated LED acknowledgement
message with extra bytes concerning
primary and secondary color
- Added baud rate setting command
SW 2.x
14/03/2018 1.2 Third release:
- replaced the words amber/orange and
yellow with color 03 and 04 in ‘’LED
COMMAND’’ explaining how these
colors are obtained
- Added ‘’DEMO mode instructions’’
- Updated to the latest software version
the values of the allowable addresses
range in the command ‘’SET
SOURCE/KEYPAD ADDRESS/IDENTIFIER’’
SW x.x
*
Obtained by mixing red at 50% and green at 100%
**
Obtained by mixing red at 25% and green at 100%