BLEC PBR150H, Инструкция и каталог запасных частей

Страница: 19 / 32

19
SECTION 9 - MAINTENANCE cont BLEC POWER BOX RAKE
Models: PBR150H - PBR180H
CASTOR WHEEL - PIVOT SHAFTS (see photo 23)
Photo 23
SCREW JACK ADJUSTERS (see photo 24)
Photo 24
The box members are drilled with a
lubrication oil hole. Every 40 hours
apply oil through hole to lubricate threads
REGULAR MAINTENANCE INCLUDES checking the rotor for damaged teeth and end shafts for
wire/string etc. entering into bearings. Also regularly wash off and clean.
Make sure instruction manual is inside plate holder at all times.
SIDE WEARING PLATES (see photo 25)
Fitted to the side plates are adjustable and replaceable wear plates, the plates are normally set
with the bottom edge level with the rotor shaft tube, The wearing plates can be repositioned in
different holes when wear has taken place.
Photo 25
Grease every 40 hours or
Weekly.
Wheel bearings are sealed and
do not require greasing
Instruction manual holder