BLEC PBR150H, Инструкция и каталог запасных частей

Страница: 11 / 32

11
SECTION 7 - PREPARING FOR USE
BLEC POWER BOX RAKE
Models: PBR150H - PBR180H
MOUNTING TO LOADER - (s ee Photos 4 & 5 )
1.
Select a level hard surface - with the POWER BOX RAKE rotor and castor wheels
resting on the ground. Drive loader forward and position top mounting bars under
hook lift up until bars are fully under hook bracket. Then lift up and tilt until lower side
pins can be lined up with mounting bracket holes, lock in position.
Photo 4 Photo 5
M ounting bracket
Connect Power Box Rake twin hose adaptor quick coupler into loader adaptor coupler
and secure with handle raise up Power Box Rake rotor clear of ground and test
hydraulic circuit in both directions.
Your Power Box Rake is now ready for use.
To dismount carry out previous instructions in reverse order.
Mounting bracket