Supply voltage
230V
Power consumption
below 1W
Number of outputs
1
Output type
relay
Maximum current (total)
16A
Maximum current (channel)
16A
Maximum load
3500W
Number of inputs
1
Input type
logical, short-circuited to N
Input voltage
230 V
housing
made of halogen-free polyurethane
composition, self-extinguishing for
thermal class B (130’C)
IP class
IP20
Dimensions
39 x 47 x 23 mm
Transmissiom
Bi-directional,with confirmation,
encrypted
Transmission frequency
2.4 GHz
μWiFI
transmission standard
compatible with WiFi, 8202.11g
Communication mode
direct connection (as an Access Point),
WiFi connection via a standard router,
connection with access from anywhe-
re in the world (only Internet access
required)
Compatible devices and systems
Apple iPhone, Apple iPad, iPad Mini,
Android, computer and mobile devices
supporting HTML5
TECHNICAL SPECIFICATIONS
ADDITIONAL INFORMATION
LOCATION AND TIME OF THE
DEVICE, SCHEDULE
SOFTWARE UPDATE
www.blebox.eu
made in Eurpe
for more information visit our website www.blebox.eu
or send us an email to: [email protected]
support is available at [email protected]
The controller can work according to a given schedule. To
To do this, you need to set the device time. Go to settings in the section “Device
time” and click the “change zone” button. Then select your region and location
from the list, confirming the selection with the “save” button. The device will
synchronize its time with the time server (if the controller is in the WiFi network
with Internet access) or download time from your phone/tablet. It is recommen-
ded that the controller is always connected to the WiFi network with Internet
access so that it can automatically synchronize its clock.
To be able to control devices based on local sunrise and sunset, you should also
choose a location for the driver. The location of the driver
you can define with your smartphone or tablet. by phone/tablet. In the “device
location” section, click the “set locations” button. The browser will ask whether
to share the location - allow. In the “coordinates” field the approximate coordi-
nates of your location should appear. If the button “set
locations” flashes red with the word “error”, or the field “coordinates” does not
change the value from “not set” to numerical data, there was a failure in getting
the location. You should then make sure that the phone/tablet has a GPS module
and whether the location sharing service is turned on on the phone.
The schedule entries are added by clicking the “add” button in the “Schedule”
section of the settings. You can select the days on which the given task, type of
entry (at a specific time, or relatively to sunrise/sunset times - only when correct
location) and set task parameters. Set tasks will be visible in the form of a list,
individual entries can be edited or deleted.
To update the software in the driver, connect the driver to
the home WiFi network (see “Access point and network settings” section WiFi ”)
connected to the Internet. Go to settings (button
“Settings” in the upper right corner of the screen) and click the “download new
software” button software in the final section of the settings. Wait for approx.
one minute, do not close the interface or take any other actions. The device
will download the latest software. You can read the software version number,
hardware version and device identifier on the very bottom of the settings screen.
the generated WiFi network. Remember that changing the network
name or password will disconnect you from the device immediately
after clicking the “save” button, so you should reconnect to the device
using the newly assigned network name and password.
You can connect the controller to your home WiFi network to control
it with it or from anywhere in the world. For this, in the section set-
tings “connect”, select the network name from the list and press “con-
nect”. If required, enter the WiFi network password. When connecting
the controller to the network home, the phone/tablet may be discon-
nected from the device’s network. In this case, it will be required to
reconnect the phone/tablet to the controller’s network.
Remember that to control the device from outside the local WiFi ne-
twork, from anywhere in the world, through the wBox application, the
option “enable remote access” in the controller must be set to “yes”.
After completing the WiFi network configuration, you can disconnect
from the controller network and connect the phone/tablet directly to
the home WiFi network. Control from the wBox application will work
in the same way as in the situation when the phone/tablet is connec-
ted to the controller network. If the user leaves the local network, e.g.
when leaving home or by attaching mobile data, the wBox application
will be there signalling this state as “remote mode”. In this case, devi-
ces can be controlled, but options are not available for safety reasons.
