The controller has the ability to work according to a given schedule.
To make this possible, set the device's time. Go to settings in the
"Device time" section, click "Change timezone". Then select your
region and location from the list, confirm your selection clicking the
"Save" button. The device will synchronize its time with the server
time (if the controller is in a WiFi network with access to Internet) or
it will download time from the phone / tablet. It is recommended
that the controller is always connected to a WiFi network with
Internet access so that it can automatically synchronize its clock.
To be able to control devices using the local sunrise and sunset, you
must also select the location of the controller. You can specify the
location of the device using a smartphone or tablet. In the section
"Device location", click "Set locations". Browser will ask whether to
share locations - allow. In the "Coordinates" field, should appear the
approximate coordinates of your location. If the "Set locations"
button blinks red with the word "Error", or the "Coordinates" field did
not change the value from "Not set" to numeric data, a failurehas
occurred during the location download. You should make sure that
the phone / tablet has a GPS module and that the sharinglocation
service is enabled on the phone.
Adding schedule entries can be performed by clicking the "Add
item" button in the "Schedule" section of settings. You can select the
days in which the task will be performed, the type of entry (at a
specific time, or relative to sunrise / sunset - only having a correctly
set location) and set the parameters of the task. The set tasks will be
visible as a list, individual entries can be edited or deleted.
To update the software in the controller, connect it to your home
WiFi network (see "Access Point and WiFi settings" section) which is
connected to the Internet. Go to “Settings” (icon at the top-right
corner of the screen) and click the "Get new firmware" button in the
final section on settings. Wait about 1 minute, do not close the
interface and don’t perform other actions. The device will download
the latest software. The software version number, hardware version
and device identifier can be read at the bottom of the settings
screen.
TECHNICAL SPECIFICATIONS
supply voltage
energy consumption
number of control
outputs
type of control outputs
230V AC
< 1W
1
relay
maximum load
maximum power
number of inputs
type of inputs
supported switches
supported switches
5A
1150VA (1150W for resistive load
e.g. heater)
1
logical, pushbutton, short circuited
to N, configurable
monostable (push-button), bistable
(traditional, cross switch)
not-illuminated
25 x 39 x 24 mm
protection level
IP20
housing
mounting method
made of polyurethane composition not
containing halogens,self-extinguishing
for thermal class B (130 °C)
in the flush-mounted box (deepen or
double), on the receiver - eg. lamps,
radiator, etc.
communication standard
radio frequency
transmission type
API
µWiFi, compatible with WiFi, 802.11g
2.4 GHz
bi-directional, encrypted
open
mode
compatible devices
and systems
encryption
direct connection (as Access Point),
Wi-Fi connection via a standard router,
connection with access from any
location in the world requires only
access to the Internet)
Apple iPhone, Apple iPad, iPad Mini,
Android, computers and mobile
devices supporting HTML5
WPA2-PSK and authenticated
encryption with associated data (AEAD)
