9 |
BLAZE OUTDOOR PRODUCTS
USER MANUAL | 10
Care & Cleaning
When cleaning filters, always remove the
grease channels and clean with hot soapy
water Both the filters and the channels are
dishwasher safe Dry thoroughly beforere-
installing
Care & Cleaning
warning
♦
Never put your hand into the vent hood while the unit is operating
♦
Turn off power to the hood before cleaning and trip the corresponding electrical
breaker supplying the range hood
♦
Make sure your cooking surface and hood are cool before cleaning
♦
Use only the types of cleaning solutions mentioned in this manual
♦
Completely dry the filter(s) immediately after cleaning
cleaning exterior surfaces
♦
Regular care will help preserve the appearance of your range hood
♦
Always wipe stainless steel surfaces with the grain to avoid scratches
♦
Clean periodically with hot soapy water and clean microfiber
♦
For heavier soil, use a liquid degreaser such as 409™ or Fantastic™
♦
If hood looks splotchy, use a stainless steel cleaner on the surface Promptly and gently
remove cleaner with a soft towel or wipe
♦
After cleaning, you may use non-abrasive stainless steel polish (such as 3m™ or ZEP™)
to buff out the stainless luster Always scrub lightly and with a clean cotton cloth
DO NOT:
♦
Use corrosive or abrasive detergent (eg, Comet Power Scrub™ or EZ-Off™ oven
cleaner)
♦
Use steel wool or scouring pads, which will scratch and damage the stainless steel
surface
♦
Leak cleaning solution onto or into the control panel
♦
Allow deposits to accumulate or remain on the hood
♦
Allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in
contact with the stainless steel for extended periods
cleaning baffle filters
All BLAZE OUTDOOR PRODUCTS hoods come with stainless steel baffle filters They should
be inspected for grease accumulation periodically The baffle filters can be washed in a dish-
washer or in a sink with hot, soapy water Simple periodic cleaning will ensure maximum filter
effectiveness
Wiring Diagram
