Blaze BLZ-SSRF-40DH, Руководство пользователя

Страница: 7 / 10

7
TROUBLE SHOOTING GUIDE
You can solve many common unit problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling the service.
PROBLEM POSSIBLE CAUSE
Unit does not operate. Not plugged in.
The circuit breaker tripped or a blown fuse. The
unit temperature control is set at “OFF”
position.
Turns on and off frequently. The ambient temperature is hotter than normal.
A large amount of drinks has been added to the
unit.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
Vibrations. Check to assure that the unit is level.
The unit seems to make too much noise. The rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling
sounds caused by the flow of refrigerant in your
unit.
Contraction and expansion of the inside walls
may cause popping and crackling noises.
The unit is not level.
The door will not close properly. The unit is not level.
The door was reversed and not properly installed.
The gasket is dirty or bent.
The shelves, bins, or baskets are out of position.

Energy Saving Tips
• Let hot items cool to room temperature before placing in the unit. Overloading the unit forces
the compressor to run longer.
• Wipe containers dry before placing them in the unit. This cuts down on frost build-up inside
the unit.
• Unit storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners
interfere with cold air circulation, making the unit less efficient.
• Organize items to reduce door openings and extended searches. Remove as many items as
needed at one time, and close the door as soon as possible.
• Unit Safety Clearance
BACK 8"
LEFT 4"
RIGHT 4"
TOP 4"