![Blaze Outdoor BLZ-3 Скачать руководство пользователя страница 14](http://html.mh-extra.com/html/blaze-outdoor/blz-3/blz-3_use-and-care-manual_2772335014.webp)
Blaze Outdoor Products Instructional Book
Page | 14
Version 1.4
Leak Testing
All gas piping and connections must be tested for leaks after installation or service. All leaks must be corrected
immediately. Remember-before exchanging an empty bottle for a new one; make sure all control valves are in
the
“off” position.
Open the valve (shut-off or
‘ON’ LP tank). Test for leaks by applying liquid soap solution to all joints. Bubbles forming
indicate gas leak.
NEVER USE AN OPEN FLAME TO CHECK FOR LEAKS
.
Gas Connections
UNPACKING UNIT:
Your Blaze Series Appliance comes pre-assembled and requires very little setup. We do however; recommend
the use of professional help during the installation of your unit as improper installation may affect your warranty.
Remove the unit from the box along with all accessories and check that no damage has occurred to the unit or
any parts.
Burners: Check the burner tubes and remove any obstructions that may be in the ports or holes. Using cold
water and a brush will be sufficient. Make sure all foreign particles are removed from the burner before use.
Make sure the air shutter on the burners is slightly opened (to about 1/8" for NG and 1/4" for LP).