Blaze King KING KT1102, Руководство пользователя

Страница: 13 / 29

Date Printed: February 15, 2008 13 Version 1.01
WARNING
ALWAYS OPEN THE DOOR LATCH AND ALLOW THE FIRE TO BUILD UP SLIGHTLY BEFORE
FULLY OPENING THE LOADING DOOR. IF THE LOADING DOOR IS OPENED TOO FAST, THE
SUDDEN INTRODUCTION OF AIR CAN CAUSE THE FIRE TO FLARE AND DISCHARGE SMOKE
AND FLAME INTO THE ROOM. SUCH A DISCHARGE CAN BURN PERSONS WHO ARE NEAR
THE WOODSTOVE.
3) Rake the bed of hot coals to the front of the firebox before putting the new fuel load in the stove.
Allow combustion air to flow under and around the fuel. Load the firebox to the desired level.
4) Close the Loading Door and latch it. Do not abuse the glass door by slamming it or striking it. Do
not force the door closed if there is wood in the firebox that is obstructing it.
5) Set the Combustion Air Control as instructed on page 12 titled "COMBUSTION AIR CONTROL".
FAN OPERATION
(Optional)
If you have the optional Fan Assembly installed, wait 30 minutes before you turn on the fans to begin
circulating the warm air into the room. Use a LOW speed setting when the stove is set for a low burn
and a higher speed setting with hotter fires.
ASH REMOVAL
The ashes should be removed any time they come within three inches of the doors lower sill. A thick
bed of ashes will significantly limit the amount of wood you can get in the firebox. Wood burns best in
a bed of ashes one half inch to one inch thick. It is not necessary or advisable to completely remove
all of the ashes when cleaning this woodstove.
MAINTENANCE
AUTHORIZED SERVICE REPRESENTATIVE
Your local BLAZE KING dealer is your authorized service representative. Should you have any
problems with operating or maintaining your BLAZE KING STOVE, contact your dealer as soon as
possible.
The dealer will help you solve operating problems, provide replacement parts, and/or
arrange warranty service repairs if required. Dealers will need information such as model, serial
number, date of purchase, and a summary of the problem.
REMOVAL OF CREOSOTE AND SOOT
1) The chimney connector and chimney should be inspected at least twice each month during the
heating season to determine if a creosote or soot buildup has occurred.