52
Note:
You can interrupt a news or weather
report whilst it is being played by press-
ing the TRAFFIC button
>
. The gen-
eral priority settings are retained and the
next report will be played.
●
DAB Regional (TA-REG):
Since DAB frequencies are broad-
cast over a large area of the coun-
try, the situation may arise whereby
you receive traffic announcements
that are irrelevant for your region.
In order to avoid this, the DAB
broadcasting ranges are divided
into regions.
Switching TA-REG on/off
➮
Press the MENU button
8
.
➮
Keep pressing the or button
:
until “DAB_TREG_OFF” or
“DAB_TREG_ON” appears in the
display.
If you wish to receive announcements
that apply to particular regions, select
“DAB_TREG_ON”. If you only wish to
receive non-regional announcements,
select “DAB_TREG_OFF”.
➮
Set the required setting using the
and buttons
:
.
➮
When you have finished making
your changes, press the MENU
button
8
or OK
;
.
Selecting the memory bank
With this device, you can store DAB sta-
tions in four memory banks (D1, D2, D3
and DT).
Five stations can be stored in each
memory bank.
➮
To switch between the memory
banks, briefly press the DAB•T but-
ton
4
.
Tuning into ensembles
With DAB, several stations on one fre-
quency are combined in an “ensemble”.
Selecting an ensemble
You can directly select ensembles that
you have received once already (for this
to work, the ensemble must be receiv-
able).
➮
Briefly press the button
:
.
The name of the current ensemble is
displayed.
➮
Briefly press the or button
:
again whilst the ensemble name is
being displayed.
The name of the next or previous known
ensemble is displayed. The first availa-
ble station in the ensemble is played.
Ensemble seek tuning
You can find new ensembles using seek
tuning.
➮
For seek tuning downwards or up-
wards, press the or button
:
for longer than two seconds.
The unit tunes into the next receivable
ensemble. The ensemble name is brief-
ly displayed. The first available station
in the ensemble is played.
DAB MODE
