7
Switching on the T ravelPilot
The TravelPilot switches on when you turn on the ignition.
The navigation page that was displayed last before the unit was switched
off will be displayed. If the monitor displays the map (only during standby
time) then,
•
switch to the Nav menu by pressing ENT.
Nav menu
You will either be prompted to enter a destination or the system will display
the destination that was selected last.
You can select the following functions from the Nav menu:
Info menu
Start guidance (when a destination has been entered)
Enter destination
MERIAN scout (if a travel guide CD has been inserted)
DSC menu
Operating the system while driving
Allowing yourself to be distracted by the TravelPilot RGS 08 can lead to a situation where you are “driving blind”.
If you are not paying attention to the current traffic situation around you, you could cause a serious accident.
Please consider the fact that at a speed of 50 km/h you are travelling 14 m every second.
• Before starting off on your journey, make sure you have familiarised yourself with the system.
• While you are driving, only use the voice output and directional symbols on the monitor.
• Stop your vehicle at a suitable location if you wish to re-program the TravelPilot RGS 08 or look up more detailed
information.
