Blaupunkt TRAVELPILOT LUCCA 3.3 EE, Инструкции по эксплуатации и монтажу

Страница: 34 / 46

34
You can select the tolerance either as a
percentage value or kilometres per hour.
Press on
Fixed Value/Percentage to
switch between the two settings.
Map options
You can use the Map Settings menu
to adjust the Lucca’s colour
settings.
You can also use this menu to select to
show/hide POIs and international and
national street names on the map.
Please read the chapter “Using map view
during route guidance”, section “Activate
additional map information”.
Audio settings
You can use the Sound Settings menu to
select the volume, navigation voice output
and button sounds for the Lucca. You can
also use this menu to set the voice output
and button sounds to mute and activate the
dynamic volume function.
This dynamic volume function adapts the
Lucca’s volume to the vehicle’s speed,
enabling you to understand the voice output
despite any loud driving noises.
Press the Navigation button.
The
Navigation menu opens.
Press the Settings button.
The
Settings menu opens.
Press the Sound Settings button.
The
Sound Settings menu opens.
Use the controller to adjust the volume
from between mute (left) to max. volume
(right):
Volume : Device volume
(for all applications such as, e.g. the
Music Player)
Voice : Voice output volume
Keys : Button / key sound volume
You can also set the voice output and
button sounds to mute:
➜
➜
➜
➜
➜
–
–
–
Press the Voice button to activate (tick)
or deactivate (no tick) the Voice mute
function.
Press the
Keys
button to activate (tick)
or deactivate (no tick) the Key/Button
mute function.
You can press the button below the
controllers to switch between the
following settings:
Single Tone : an acoustic signal issued
before voice output
Disabled : no acoustic signal before
voice output
Double Tone : a double acoustic signal
issued before voice output
Press the Dynamic Volume button to
activate (tick) or deactivate (no tick)
automatic adjustment of the volume to
the vehicle’s speed.
If you activate this function, you will be
shown the
Dynamic Volume menu:
Slide the Minimum speed controller
in the relevant direction to specify the
speed at which the volume is to be
increased.
Slide the
Maximum speed controller
in the relevant direction to specify the
speed at which the volume is to be set
to maximum.
Route parameters
You can use the Route Parameters
menu to specify the following route
planning parameters:
Route options: Route speed profi le
(fast/short/economy)
Vehicle profi le
(vehicle/bicycle/
pedestrian)
Types of roads and permitting/not
permitting U-turns
These route parameters will be saved and
used for all future route guidance.
Please read the chapter “Selecting route
parameters”.
➜
➜
➜
–
–
–
➜
➜
➜
•
•
•
Basic settings
Lucca3_3RU_long_GB.indd 34 Lucca3_3RU_long_GB.indd 34 11.07.2007 16:51:13 Uhr 11.07.2007 16:51:13 Uhr