28
INTRODUCTION
NAVIGATION
RADIO
CD / MP3
CD CHANGER
SETUP
APPENDIX
In smaller municipalities, it is possible that a postcode will cover several small
towns and villages. In this case you must select the appropriate place name
after entering the postcode. In general, entering the first letter of the place name
that you want will be sufficient. This will then appear next to the postcode in the
display.
Note: You can only enter destinations by way of the postcode if the
appropriate data are available on the navigation CD-ROM.
1
Mark and confirm the
DEST
ination
INP
ut menu item in the main navigation
menu and then mark and confirm the
TOWN
menu item.
✔
The text input line for entering the town name appears and the town name
that was entered last is displayed.
Plus Point: The system automatically proposes the last entered town name
for the new destination. You can accept this proposal by pressing and hold-
ing down the OK button
;
or by pressing the button
8
. The last 20 towns
are stored by the TravelPilot. If you enter the first letters of a destination and
they match the first letters of one of the last 20 towns, the system will display
the corresponding town name. If there is no match, the first suitable entry
from the town list will be displayed.
2
Enter the place name using the text input line. (For further information, read
the section entitled “Entering destinations using the text input line”).
3
Switch to the list.
✔
The name is displayed in the list of destination places.
4
Select the town that you want and press the OK button
;
to accept the town
as your destination.
✔
The system then accepts the town as the destination.
SUPRAREG.D
TOWN
POS. AREA
DESTN AREA
SELEC=
NAV
TMC
BERLIN [D]
=OWN
NAV
TMC
BERLIN
[D]
EG ,C
=OWN
NAV
TMC
2 BA TPAmsterd_gb
26.09.2005, 12:46 Uhr
28
