2 IN 1 AIR COMPRESSOR / INFLATOR
1. To turn the LED light on, press the light button in.
2. To turn the LED light off, press the light button again.
Note: The compressor must be connected to a power source for
the LED light to work.
3. Controls
The digital pressure reading can be switched between PSI, BAR and
KPa to match the requirements on the item being inflated. While a
high pressure item is inflated, the current air pressure will be
displayed on the digital display.
Digital Display (PSI / BAR / KPa)
1. To switch between the 3 pressure units, press the pressure units
button.
Connecting to a 12V outlet
1. Press the (+) button to increase the preset pressure.
A desired pressure can be preset and the compressor will
automatically shut-off once the pressure is reached. The preset
pressure must be set before starting the device.
Preset Pressure
2. Press the (-) button to decrease the preset pressure.
4. Inflating Tyres
IMPORTANT:
Before connecting or disconnecting accessories, always make sure that the
compressor is off.
1. Unscrew the cap on the tyre air valve.
2. Attach the air hose by screwing the end of the
hose in a clockwise direction.
NOTE:
The required pressure should be written
on the side wall of the tyre.
3. Adjust the preset pressure to the recommended
pressure using the increase (+) and decrease (-)
pressure buttons.
4. Press the on/off switch forward into mode
"l" to inflate high pressure items.
5. Once the preset pressure is reached, the
device will automatically shut off. After the
device has automatically shut off, press the
on/off switch into the off position "0".
6. Unscrew the air hose and tighten the
plastic cap onto the tyre air valve.
Operation
5. In ating Sporting Equipment
1. Affix the ball or general purpose adaptor
into the end of the air hose.
2 Insert the adaptor into the item to be inflated.
NOTE:
The required pressure should be
written on the item.
3. Adjust the preset pressure to the
recommended pressure using the increase
and decrease pressure buttons.
4. Press the on/off switch forward into mode
"I" to inflate high pressure items.
2 IN 1 AIR COMPRESSOR / INFLATOR
