2. The high volume air hose is also stored
on the side of the device and can be
removed be sliding out.
2.
Digital Display
4.
Preset Pressure Buttons
1. LED Torch
3.
Pressure Units Button
2 IN 1 AIR COMPRESSOR / INFLATOR
15. Ball Adaptor
13. High Volume Adaptors
ACCESSORIE
S
14. General Purpose Adaptor
5.
Carry Handle
6.
Light Button
8.
High Pressure Air Hose
7.
On/Off Switch
Setup and Preparation
1. Adaptors & Air Hoses
Removing Adaptors
The compressor unit has 5 adaptors to suit a range of inflation applications. All the adaptors are
secured in either the compartment on the side or base of the device.
1. The general purpose adaptor & ball adaptor
are stored in the side compartment.
1. The 3 high volume adaptors are stored in
the compartment in the base.
11. High Volume Air Outlet
12. High Volume Air Inlet
10. 12V Adaptor
9.
High Volume Air Hose
2. The 12V socket is also stored in the compartment
in the base.
1. Remove the 12V socket from the base of
the device.
Note:
Check car outlet for compatibility -
power rating of 120W.
2. Connect the 12V socket to a 12V DC outlet
which can be found in your vehicle.
2. Switching ON & OFF
Switching On and Off
The 2 in 1 Air compressor Inflator features 2 operating modes which are high pressure or high volume.
High Pressure Mode allows you to inflate items that require high pressure such as sporting equipment
or car and bike tyres. High Volume Mode is suitable for large volume items such as air bed or pool toys.
1. To operate in high pressure mode, press the
on/off switch forward into mode "I".
2. To operate in high volume mode, press the
on/off switch backward into mode "II".
WARNING:
Compressed air can be dangerous. Never point the outlet nozzle towards any part of
your body or another person.
WARNING:
Ensure the device is switched off and disconnected from the power supply before
performing any of the following steps.
Side Compartment
Base Compartment
Connecting to a 12V outlet
2 IN 1 AIR COMPRESSOR / INFLATOR
