ENGLISH
E-2
Notes
•
Be sure to use this unit with the front panel closed.
The unit is automatically switched of
f when the front panel
is left open for about 10 minutes.
•
Do not handle the unit roughly when opening/closing the
front panel.
•
Do not put any object or use it like a tray when the front
panel is open in a lying position.
•
Do not press OPEN button when closing the front panel.
•
Do not put too much force to the operation buttons or the
display window as it may cause damage or deform the unit.
•
Connectors on the unit and front panel are vital parts trans-
mitting the signal. Do not touch, push or scratch them.
•
Be careful not to pinch your fingers or hands when opening
and closing the front panel.
•
Do not press hard on the front panel when af
fixing it to the
unit. No more than light to moderate pressure should be
needed.
•
Make sure there is no dust or dirt on the electrical terminals
on the back of the front panel as this could cause intermit-
tent operation or other malfunctions.
Detaching the Front Panel
EJECT b
utton
3.
Close the inner co
v
e
r.
Do not lea
v
e
inner co
v
er in the do
wn position unless the
front panel is in place
.
2.
Pull the front panel to
w
ard y
our direction to remo
v
e
it.
1.
Press the
OPEN
fir
mly to open the flip do
wn front panel.
Ejecting the CD
Press the recessed b
utton located to the left behind the F
ront
P
anel.
Handling the Front Panel
Attaching the Front Panel
Place the r
ight hand side of the front panel so that the par
ts
A
of the front panel are engaged with the par
ts
B
of the unit
as sho
wn belo
w
.
Then push the left hand side of the front
panel until it is securely loc
k
ed.
Front Panel Open / Close
Panel open
Press the
OPEN
.
Panel close
Raise the front panel with y
our
finger until it loc
ks in place
.
Security/Retailer Display
Bolt the front panel with the locking screw (See page 19) in
the inner cover as shown below
, to protect the front panel
from theft and from getting lost.
Loc
king scre
w
