31
Pasadena DJ (RP)
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Stopping Fast Forward operation
•
Press FR.
Fast Rewind
•
Press FR.
At the beginning of the tape, the me-
chanism will automatically start play-
back.
Stopping Fast Rewind operation
•
Press FF.
To switch to the other tape side:
Press simultaneously.
“TR1-PLAY” or “TR2-PLAY” shown in the
display.
FR : Fast rewind; stop by pressing FF.
FF : Fast forward; stop by pressing FR.
PROG selector
(To change the tape direction during
cassette playback)
•
Press FR and FF simultaneously.
At the end of a tape side, the mechanism
changes directions automatically to play the
other side (Autoreverse). The display shows
“TR1-PLAY” for track (side) 1 or A or “TR2-
PLAY” for track 2 or B.
Notice:
If there is too much tension on the tape during
playback, the set may switch over by itself
before having reached the end of the tape
side. In this case check the condition of the
cassette tape. Sometimes it helps to rewind
it completely.
Dolby B-NR* and
tape equalisation with B/MTL
Dolby B-NR*
With this unit you can play back tapes recor-
ded with Dolby-B or without noise reduction.
Cassette tapes recorded with Dolby NR*
stand out by their much lower tape hiss and
the improved dynamics.
If Dolby B-NR is switched on, “B” will light up
in the display.
* Noise Reduction system manufactured under license
from Dolby Laboratories Licensing Corporation. “Dol-
by” and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Tape operation
Inserting a tape
•
Turn on the set.
•
Insert a tape.
Insert the tape with side A or 1 showing up, the
open side facing to the right.
= Press to eject the tape.
The tape will be played in the direction used
last.
“TR1-PLAY” in the display means that track
1 or A is being played.
Removing a tape
•
Press .
The cassette will eject.
Fast Forward/Rewind
Fast Forward
•
Press FF.
At the end of a tape side, the mecha-
nism changes directions automatically
to play the other side.