Blaupunkt Pasadena CD71, Инструкции по эксплуатации и монтажу

Страница: 16 / 37

45
DEUTSCH
ENGLISH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
er, and the memory location from “ST1” to
“ST6” currently being sampled is displayed
with light and shade reversed.
Stopping the SCAN, continue listening to
a station
➮
Press the softkey,
4
, indicating “SCA”
again.
The scanning process is stopped, and the last
station sampled remains active.
Adjusting the sample duration
(Scantime)
➮
Press the MENU button,
8
.
➮
Press the or button,
7
, as often
as is necessary for “SCANTIME” to ap-
pear in the display.
➮
Adjust the desired sampling time with
the <
key,
7
.
➮
Press the OK button,
5
or the MENU
button,
8
, to leave the menu. The set-
tings are then saved.
Note:
The sampling duration that is selected is also
applied to the scanning in CD, tape cassette,
MiniDisc and CD changer operation (depend-
ing on how the radio is equipped).
Program type (PTY)
As well as the station name itself, some FM
stations also supply information about the type
of program being transmitted. This informa-
tion can be received and displayed by your
radio.
Examples of these program types could be:
CULTURE TRAVEL JAZZ
SPORT NEWS POP
ROCK CLASSICS
Using the PTY function it is possible to spe-
cifically select stations transmitting a particu-
lar program type.
PTY-EON
When the program type has been selected
and the search started, the device changes
from the current station to the nearest station
transmitting the selected program type.
Note:
If no station is found offering the chosen pro-
gram type, the station that was being received
most recently is restored. If the selected sta-
tion, or another station from the station chain,
starts to transmit the desired program type at
a later time, the device changes automatical-
ly from the current station, or out of CD, cas-
sette tape, MiniDisc or CD changer opera-
tion (depending on what is fitted to the car
radio), and switches over to the station with
the desired program type.Switching PTY on
and off
In order to use the PTY function
➮
press the TUNE button,
>
, when the
radio is operating.
The radio function menu is shown on the dis-
play.
➮
Press the softkey,
4
, indicating “PTY”.
When PTY is switched on, the display briefly
shows the last program type that was select-
ed. PTY appears in the display.
To return to the basic radio menu
➮
press the TUNE button,
>
, or wait for
eight seconds. The settings are then
saved.
Selecting the program type and starting
the search
➮
Press the or button,
7
.
The current program type is shown on the
display.
If you want to change to a different program
type
➮
press the or button,
7
, as often as
necessary, until the desired program
type is displayed.
RADIO OPERATION