Blaupunkt MS70BT Скачать руководство пользователя страница 8

Страница: 8 / 100

Remote control battery installation

Open up the battery door and insert 2 x AAA battery(included) into the compartment; please make sure the polarity of battery
will aim and correspond to the positive and negative engraved symbol in the compartment. Then close the battery door.

Notes:

a. The best working distance of remote control is within 7 meters without any obstacle in between. Please aim to the remote
control sensor locates on the left corner of display during operation.
b. The sensitivity of remote control will become weak when the battery power exhausted. Please replace it with fresh one for

operation.
c. Please take out the battery in case of none-operation in a long time.

d. Please dispose the battery in an environment friendly way. Please reference the local government requirement for the detail.

General operation
1.Power on/off and standby:

The red color power LED will light up when you connect it with AC power successfully; please

remove the AC plug for complete power off. Press the power button on front panel or remote control for standby on and off
switching.

2. Mute:

press the MUTE button on remote control to silence the sound output; press it again to resume the playing. You can

also resume the playing by press the /- button. There still have very small sound output from the unit in mute state,
please kindly note this is not malfunction.

3. Play mode selection:

press the SOURCE button repeatedly to switch the play mode between CD/ /FM radio/LINE

IN/Bluetooth. Press the CD/USB button from remote control to switch the CD and USB playback mode.

4. Volume adjustment:

press the VOL+/- button from remote control or turn the volume knob on the front panel to increase or

decrease the output volume.

5. Sound equalizer:

press the EQ button to switch the playing equalizer mode between Jazz-Rock-POP-Classic/off.

6. Treble & bass adjustment:

short press the /- or bass +/- button repeatedly from remote control to adjust the treble

and bass setting for output sound.

7. Digits 0 ~9 and 10+ button:

Key-in the relative digits and wait a while,, then the unit will skip up the relative track from

current one. Press 10 + button can skip the playing track by increase 10 in case of over 10 tracks inside and get fast selection;
The function is available in CD and USB playback mode.

8. Play,pause and stop:

In CD/USB/Bluetooth mode, press the play and pause button to pause or resume the playback; In CD

and USB mode, press the stop button to stop the playback, and press play button for music playback resuming.
9. Previous and next, Fast-forward and fast-rewind: short press previous/next button skip to last or next track for playing; Press
and hold fast-forward / fast-rewind button to fast-forward or fast-rewind current playing track, and resume to normal playing
after release the button.

10. Repeat playback:

In CD and USB mode, press repeat button repeatedly for repeat one, repeat all, repeat folder and repeat

off selection;

11. Random playback:

press random button for random and random off playback.

12. CD disc loading:

Press the eject button to open the CD door, and load a CD disc. Press it again to close the CD door.

13. Loudness:

short press the button to enhance the bass for sound output.

14. Introduce playback:

the unit will play the first 10 seconds of the track, then skip to next track.

15. Repeat playback a specific track:

in CD/USB mode, short press the A-B button from remote control to select the start point

of your expected repeat playback track, press it to select the end point; then the unit will repeat playback the specific track till
you press the A-B button again to cancel and resume normal playing.

16. System reset:

in standby mode, press the reset button 5 seconds to show “ reset” on display, and the system will be reset.

CD playback operation

This product includes CD playback function which can play with CD disc under CD/CD-R-RW/MP3/WMA audio format (DVD not

included). Before start the CD playback, please check if there have any dirty dot or scratch on the CD disc, otherwise the CD may

cannot read out or create noise sound.

1. Press the source button repeatedly or CD/USB button to enter the CD mode.

MS70BT