Blaupunkt MS70BT, Руководство пользователя

Страница: 10 / 100

AUX IN/line in/MP3 link and headphone operation
In order to wire connection and playback the music from other player or source, please follow up below operation.
1. Using the supplied audio cable( ( 3.5mm to 3.5mm stereo) ) connect the LINE IN jack((3.5mm stereo type) on front panel of
main unit, and the another 3.5mm stereo connector connect with line-out or headphone jack of outsourcing player.Then
switch to LINE IN mode by pressing the source button.
2. Select the music and play on your player, then the sound will output from the micro system.
3. In AUX IN playback mode, the main control is on the outsourcing player side. But you also can control the volume, EQ and
mute the sound on the micro system side.
Line out:
using the audio cable(not include) connect the LINE OUT jack(RCA type) on rear panel of main unit, and the other
terminal connnect with AUX IN jack of outsourcing active speaker. Select and play the music on the micro system side, then
there will have sound output both on the micro systen and outsourcing active speaker.
Clock time and alarm (playback wake up and auto play) setting
The unit includes clock time and alarm setting which allows you to enjoy the entertainment base on a personal wake up time,
and the music will start to play automatically when the setting time is coming on.
1. Clock setting: in standby mode, press and hold the clock button few seconds from remote control to start the setting, and 24
hours time format will flare on display; press c / - button to select the 12/24 time format, and press the clock button
again to confirm your selection; then the hour digits will flare on display ; press c / -button to adjust the hour, and
press the clock button again to confirm; then the minute digits will flare on display, press c / - button to adjust minute,
then press clock button again to confirm and finish the clock setting.
2. Playback wake up (alarm) time setting: in clock time interface, press and hold alarm button from remote control few
seconds to start the setting, then the alarm source CD/USB/FM will show on display; press c / - button to select the
alarm source, and press the clock button again to confirm; then skip to rest setting of the hour/minute/waking up volume
which is similar operation to alarm source , press alarm button again to confirm and finish the selection.
Notes:
a. The clock and alarm time setting is only available when the main power is remained. Please re-set up the setting in case of
power interrupted.
b. The “alarm” will show on display after the alarm time setting successfully. Short press the alarm button in standby mode can
turn off the alarm setting, short press it again can review the alarm setting.
c. When the alarm time is on, the unit will playback (CD/FM radio/USB) automatically, and the volume will crease gradually till
the setting alarm volume. You can press the power button to turn off the playback.
Trouble shooting
1. Cannot power on the unit
a. Please check if the AC power cord was connected wall outlet properly.
b. Please contact with service center in case of the problem remains.
2.No sound output.
a. Please try to adjust the volume.
b. Please check if you selected the correct play mode.
c. Please contact with service center in case of problem remains.
3.The CD disc cannot read out, or intermittent sound during playback.
a. Please try to replace and play another one CD disc with CD/CD-R-RW/MP3/WMA format music.
b. Please try to clean up the CD disc due to dirty dot or scratches.
c. Please contact with service center in case of problem remains.
4.Background noise during FM playing.
a. Please full extent the FM antenna, try to adjust the antenna direction.
b. Please move the unit to next the window.
c. Please switch to other station for listening.
5. Intermittent sound during Bluetooth playing.
a. Please try to move your Bluetooth device more close to the unit.
b. Please try turn off the Bluetooth function and repair it again.
6. The remote control does not work well.
a. Please close and direct to the remote control sensor for operation.
b. Please replace the battery with fresh one due to weakness battery power.
Specification
Power source: AC 110-240V, 50/60 Hz
CD compatible: CD/CD-R-RW/MP3/WMA
FM frequency: 87.5-108.0 MHz
USB rating: 5V, 500mA, 2.0 versions, supported up to 32GB storage device
Bluetooth: V2.1+EDR, within 10 meters for operation.
RMS output power: 2 x 70W
Power consumption: 140W
Standby power consumption: < 0.5W
(Note: the above specification may revise without prior notice.)
8
MS70BT