Blaupunkt MS45BT, Руководство пользователя

Страница: 5 / 112

3
5. The unit should not be impeded by covering the ventilation opening with items such as newspaper, table-cloths, curtains
etc. Make sure that there are at least 20 cm of space above and at least 5 cm of space on each side of the unit.
6. The apparatus must not be exposed to dripping or splashing and that objects filled with liquids, such as vases, must not be
placed on the apparatus.
7. To prevent fire or shock hazard, do not expose this equipment to hot places, rain, moisture or dust.
8. Do not locate this unit near any water sources e.g. taps, bathtubs, washing machines or swimming pools. Ensure that you
place the unit on a dry, stable surface.
9
。 . Do not place this unit close to a strong magnetic field.
10. Do not place the unit on a amplifier or receiver.
11. Do not place this unit in a damp area as the moisture will affect the life of electric components.
12. If the system is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense
on the lens inside the player. If this occurs, the system will not operate properly. Please leave the system turned on for
about an hour until the moisture evaporates.
13. Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly
damp cloth.
14. When removing the power plug from the wall outlet, always pull directly on the plug, never pull on the cord.
15. Depending on the electromagnetic waves used by a television broadcast, if a TV is turned on near this unit while it is also
on, lines might appear on the TV screen. Neither this unit nor the TV is malfunctioning. If you see such lines, keep this unit
well away from the TV set.
16. The mains plug is used as the disconnect device, the disconnect device must remain readily operable.
17. To keep the laser pickup clean, do not touch it, and always close the disc tray.
18. During playback, the disc rotates at high speed. DO NOT lift or move the unit during playback, doing so may damage the
disc or the unit.
19. When changing places of installation or packing the unit for moving, be sure to remove the disc and return the disc tray to
its closed position in the player. Then, press switch to turn the power off and disconnect the power cord. Moving this unit
with the disc loaded may result in damage to this unit.
20. Put discs back in their case after playing them. Never expose discs to direct sunlight or heat sources. Never leave discs
inside a car parked in full sunlight.
21. Do not touch the playback side of disks. Hold discs by the edges to avoid leaving fingerprints on the surface. Any dust,
fingerprints or scratches may cause a malfunction. Never attach a label or sticky tape to the disc.
22. Use a clean soft lint-free cloth to clean the disc, working from the center outwards in a straight line, thinners, commercially
available cleaners or anti static sprays for vinyl discs.
23. To prevent possible hearing damage, do not listen at high volume levels for long periods.
WARNING: DANGER OF RADIATION
This label means that this unit contains a laser component. Opening the CD compartment
lid and defeating the safety interlocks will expose the user to radiation from the laser beam.
Do not stare into the laser while it is operating.
BEFORE OPERATION
Notes: Concerning compact discs.
Since dirty, damaged or warped discs may damage the appliance, care should be taken of the followings items:
a.
Usable compact discs. Use only compact disc with the mark shown below.
b. CD compact disc only with digital audio signals.
NOTICE
Conformity
Hereby, Blaupunkt Competence Center 2N-Everpol Sp. z o.o., declares that this equipment is in compliance with the essential
requirement and other relevant provisions of Directive 2014/53/EU. Declaration of conformity can be obtained from the
product page at www.blaupunkt.com.
Responsible party: 2N-Everpol Sp. z o.o, Puławska 403A, 02-801 Warsaw, Poland, Phone: +48 22 331 99 59, E-mail:
info@everpol.pl
Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.