40
Scanning tracks (SCAN)
You can briefly listen in to all the tracks
on a CD.
➮
Hold down the OK button
;
for
more than two seconds. The next
track starts to play.
Note:
●
The scanning time is adjustable.
Read about setting the scanning
time in the section “Setting the
scanning time” in the chapter “Ra-
dio mode”.
Stopping SCAN and continuing
playback
➮
Press the OK button
;
to end
scanning.
The current track will then continue to
play.
Repeating a track (REPEAT)
➮
If you would like to repeat a track,
press button 4 RPT
>
.
“REPEAT TRCK” appears briefly on the
display, the RPT symbol lights up. The
track is then repeated until RPT is de-
activated.
Stopping REPEAT
➮
If you would like to end repeat,
press the button 4 RPT
>
once
again.
“REPEAT OFF” appears briefly on the
display, the RPT symbol goes out. Nor-
mal playback is resumed.
Interrupting play (PAUSE)
➮
Press the button 3
>
.
“PAUSE” appears on the display.
Ending Pause
➮
Press the button 3
>
during the
pause.
Play then resumes.
Changing the display
➮
To alter the display between track
number and time or track number
and playing time, press the
/
DIS
7
button once or several
times for more than two seconds
until the desired elements appear
on the display.
Traffic announcements in CD
mode
➮
If you want to receive traffic an-
nouncements whilst listening to a
CD, press the TRAF
?
button.
Traffic announcement priority is active
when the traffic-jam symbol lights up on
the display. Please see the chapter “Traf-
fic information”.
Removing a CD
➮
Press the
button
9
.
The flip/release panel opens to the front
and the CD is ejected.
➮
Carefully remove the CD and close
the flip/release panel.
CD MODE
