Blaupunkt MEMPHIS DJ, Руководство по эксплуатации

Страница: 12 / 16

Memphis DJ
26
Listening to the radio during
fast winding
with the RM button (Radio Monitor)
<
.
During fast winding (and CPS) the unit is
usually muted. Nevertheless you can listen
to the radio
●
by pressing RM
<
, “RM” is shown in
the display
D
l.
As soon as fast winding starts, the set plays
the programme of the tuned-in station.
Switch this function off by pressing this
rocker switch once again, “RM” goes off in
the display.
Switching between the audio
sources
(Cassette radio CD cassette) with
the SRC (source)
>
.
With the cassette inserted
●
press the SRC
>
.
The set switches from cassette operation to
radio or CD mode.
When cassette mode was activated, the
cassette tape is stopped. The tape head and
the pinch rollers retract in order to protect the
cassette and the tape deck (standby mode).
Switch back with the SRC
>
.
Cassette eject
●
Press the FR and FF
;
simultaneous-
ly.
Care Notes
We recommend C-60 and C-90 type tapes
for use in any automobile tape player; to
protect your tapes, store them in a cool place
away from dirt, dust, or excessive tempera-
tures above 50
° Celsius. In order to ensure
smooth tape operation, cold tapes should be
allowed to heat up a bit before they are
played. If dust collects on the audio head or
the rubber roller, problems related to rough
tape operation or poor sound quality may
occur after approx. 100 hours of operation.
For normal contamination, use a head-
cleaning cassette to remove the dust; for
more intensive contamination, use a cotton-
wool tip soaked with alcohol. Never use hard
tools!
Traffic broadcast
reception (ARI)
Certain FM stations broadcast local traffic
messages from time to time. Besides va-
rious other advantages, the ARI system will
make it easier for you to find these
stations.Traffic information broadcasting sta-
tions can be identified from the ARI zone
ident
D
n. The frequencies of regional ARI
traffic information stations are indicated on
the blue motor way signs.
Adjusting the priority for ARI messages
By activating this function, all non-ARI stati-
ons will be muted. ARI can be switched on/
off with the ARI button
B
. If you wish to
listen to traffic broadcast stations only,
●
press the ARI button
B
.
If the priority for ARI messages is adjusted,
“ARI” is shown in the display
D
h.
If your set is tuned to a non-ARI station, the
ARI alert will be released.
●
Press the search tuning rocker switch
/
F
to tune to the next traffic bro-
adcast station.