Blaupunkt LS200SUB, Руководство пользователя

Страница: 10 / 137

Important notes:
1. If there is no sound come out of the soundbar in optical or HDMI mode. Make sure the audio setting of your source player (e.g.
DVD player, game player, TV) is set to “PCM stereo” or “ stereo 2.0” with digital output. Please reference your TV or player manual
for this operation.
2. HDMI(ARC): The soundbar supports HDMI with Audio Return Channel(ARC). If your TV has HDMI ARC compliant(reference
your TV user manual for details), you can hear the TV audio through your soundbar by using a single HDMI cable(not included).
The HDMI ARC connector on the TV may be labelled differently, please pay attention to check your TV's manual.
3. The output sound of optical and HDMI mode may louder than AUX IN etc which is normal, because the digital audio signal
input and output level is different on audio source player( like DVD player, TV etc).
4. In case finished above connection and setting, you can start to operate the soundbar according to this manual, and
entertainment.
Operation
Power connection:
Please check if the power source correspond to the rating voltage spec, which locates on the rear panel of
soundbar and subwoofer each. If it does not match, please consult to your dealer or service center. Plug on the attached AC
power plug on to the wall-mount socket in order to get the power source.
Power on/off: short press the power button on soundbar to power on the unit, press it repeatedly to switch play model
between Bluetooth/optical/HDMI/USB/AUX, long press(3 seconds) the power button to standby the unit. You also can achieve
the same function by pressing power and input button from remote controller.
In case we power on the soundbar and wirelss subwoofer, the unit will auto pair with wireless subwoofer within few seconds. If
not, please try manual pairing operation, which introduce in the following chapter of this manual.
Bluetooth operation
This product includes Bluetooth function which can wireless playback the music from other Bluetooth device (like smart
phone, tablet, TV etc).
1. Power on the unit, press input button by remote controller repeatedly to enter Bluetooth mode, and the “ BT” symbol will
flare on display which means the unit is ready to pair.
2. Enable the Bluetooth function on your device, and search the available device (please reference your device manual for
operation), then check the available Bluetooth device on the list. Select “ BP LS200” for pairing, and the Bluetooth symbol will
stable on display after paired successful.
3. Select and play the music from your Bluetooth device, adjust the volume level properly, then the sound will come out from
the speaker.
4. In Bluetooth mode, you can do operation like previous/next track selection, play/pause, mute etc. by pressing relevant
button from remote controller.
Notices:
a. All Bluetooth devices are not guaranteed for pairing successfully due to different design and brand.
b. The best working distance of Bluetooth is within 10 meters without any obstacle in between.
c. The unit only can pair and work with one Bluetooth device in one time.
d. In case of an incoming phone call during Bluetooth playback; the music will stop temporary, and resume to playback after
end the phone call.
8