Blaupunkt LS 215e, Инструкция по эксплуатации

Страница: 52 / 59

LS 215e
Basic Operation
Preparation
1. Before you turn on the unit, please check whether all connections are connected
properly and safe.
2. Press the
POWER ON/OFF button on the rear panel of subwoofer to turn on the main
power. Then the LED indicator on the front panel of subwoofer will light up.
Standby Mode
Press the button on front panel of subwoofer or STANDBY button on remote control to
switch ON/OFF the Standby mode.
Note : Make sure that the unit is connected to the power source.
Equalizer Adjustment
You can adjust the equalization setting during entertain the music. Press the “ TONE ”
button on remote controller to switch treble/bass/subwoofer setting. Press +/- button to
adjust the setting value.
Volume Setting
Press the VOL.+/- buttons to turn the volume up or down.
MUTE Button
If you press the MUTE button while playing, the sound output will be switch off. Press the
MUTE button again or the / ( VOL+/- ) buttons to resume the previous volume level.
Play/Pause Button
In playing status, press the ( PLAY/PAUSE ) button to pause, press the button again to
continue playing.
Note : These buttons can work on Bluetooth mode only, cannot support in other audio
mode.
Previous And Next
In play status, press the go to the previous audio file; press the go to the next audio file.
Note : These buttons can work on Bluetooth mode only, cannot support in other audio
mode.
Music Playing Mode Selection
There have built-in DSP for music style selection. Press DSP button on remote controller
in once for “Off, Rock, Jazz, Classic, Pop, Vocal, Dance, Party” recycle selection.
Play Source Selection
The Soundbar system has included analog & digital input for different audio device
connection. The Bluetooth, HDMI, optical and coaxial is for digital inputs. The AUX is for
L/R channel analog input. You can press relative button on remote controller for input
sourcing selection. Or press the source button on the front panel of subwoofer for
“
Bluetooth > HDMI1 > HDMI2 > Coaxial1 > Coaxial2 > Optical > AUX ” play mode selection
in recycle.
52