www.blaupunkt.com
LV 1224
8
CLEANING PRE-FILTER (See Figure 3)
1.
Turn off and unplug the unit.
2.
Press the Lock & Release Button and remove the Rear Cover from the unit.
3.
Remove the pre-filter from the
HEPA Filter.
Clean the pre-filter with vacuum
brush attachment of your vacuum cleaner. This will remove lint and dirt from
the filter.
Figure 3
4.
After cleaning, reattach the pre-filter to the
HEPA Filter
and install the rear
cover back to unit and securely latch in place.
5.
To ensure optimal performance,
clean the pre-filter often.
REMOVING/INSTALLING UV LAMP (See Figure 4)
1.
To access the UV lamp, remove the rear cover and HEPA filter
. After removing
HEPA filter, use a screwdriver to remove the two screws holding the UV shield
and remove the UV shield.
2.
To remove the UV lamp, rotate it 1/4 turn and then slide it out of the lamp
socket.
3.
To install the UV lamp, slide it into the lamp sockets and rotate it 1/4 turn.
4.
The UV lamp should be replaced once a year.
