349
Appendix
Supported iPod/iPhone devices
Our product can support below listed iPod/iPhone gen-
erations:
• iPod nano (7th generation)
• iPod nano (6th generation)
• iPod nano (5th generation)
• iPod classic
• iPod touch (5th generation)
• iPod touch (4th generation)
• iPhone 5s
• iPhone 5c
• iPhone 5
• iPhone 4s
• iPhone 4
• iPhone 3GS
"Made for iPod" and "Made for iPhone" mean that an elec-
tronic accessory has been designed to connect specifi -
cally to iPod, iPhone respectively, and has been certifi ed
by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod,
iPhone may aff ect wireless performance.
iPhone, iPod are trademarks of Apple Inc., registered in
the U.S. and other countries.
DivX®, DivX Certifi ed® and associated logos are trade-
marks of DivX, LLC and are used under license.
Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274
This DivX Certifi ed® device has passed rigorous testing to
ensure it plays DivX® video.
To play purchased DivX movies, fi rst register your device
at vod.divx.com. Find your registration code in the DivX
VOD section of your device setup menu.
DivX Certifi ed® devices have been tested for high-quality
DivX® (.divx, .avi) video playback. When you see the DivX
logo, you know you have the freedom to play your favorite
DivX movies. DivX video can include advanced playback
features such as multiple subtitle and audio tracks. Enjoy
your favorite videos—from content you create to videos
you discover online—with DivX Certifi ed devices.
Windows® und Windows Media® are registered trade-
marks of the Microsoft Corporation in the U.S.A. and/or
other countries.
This product is protected by certain intellectual property
rights of Microsoft. Use or distribution of such technolo-
gy outside of this product is prohibited without a license
from Microsoft.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc.
The Parrot trademarks and logo are registered trade-
marks of Parrot S.A.
Manufactured under license from Dolby
Laboratories.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.
FCC Statement
1. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, in-
cluding interference that may cause undesired operation.
2. Changes or modifi
cations not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful inter-
ference in a residential installation.
This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in ac-
cordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can be de-
termined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV techni-
cian for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance of
20 centimeters between the radiator and your body.
Industry Canada Statement
English: This device complies with Industry Canada
licence exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any
interference, including interference that may cause un-
desired operation of the device.
Français :
Le présent appareil est conforme aux CNR d'In-
dustrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage,
et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement.
© 2014 All rights reserved by Blaupunkt. This material may
be reproduced, copied or distributed for personal use only.
15_Philadelphia845_ro.indd 349
11.09.14 11:17
25
ENGLISH
Controls – Device
1
RADIO
button
Start radio mode
In radio mode: Select waveband/memory bank
2
PHONE
button
Starting Bluetooth mode
In telephone mode: Call up menu of last source
3
NAVI
button
Call up navigation
In navigation mode: Call up menu of active source
4
SRC
button
Short press: Select source
Long press: Call up main menu
5
Left rotary/pushbutton
Short press: Switch on device
In operation: Mute audio source
device
Turn: Adjust volume
6
Right rotary/pushbutton
Turn: Navigate in menus/lists and change settings;
lm
Short press: Call up selected menu entries and con-
rm settings; start and interrupt playback
Long press: Change to next higher menu level
7
SETUP
button
Call up/exit settings menu
8
microSD card reader for navigation data
Access only with open cover
9
Cover
:
Front AV-IN socket (source AV-IN 1)
Access only with open cover
;
SD card reader
Access only with open cover
<
Front USB socket (source USB 1)
Access only with open cover
=
Reset button
Restoring the original factory settings of the device.
Caution! All personal settings will be lost!
>
button (Eject)
Eject a DVD/CD
?
DVD/CD drive
@
Touchscreen user interface
A
Infrared receiver for remote control
B
Microphone
1
2
5
3
4
6
7
8
9
15
17
18
13
14
16
10
12
11
02_Philadelphia845_gb.indd 25
27.08.14 14:10
5
Placing the device in operation
Caution!
Transport securing screws
Ensure that the transport securing screws at the
top side of the device are removed before the
startup of the de-vice.
Turn on/off the power
Press and release [ ] button to turn the
unit on.
Press and hold the [ ] button to turn the
unit off.
Note:
The unit will power on in the same state it was
in when powered off.
Mute
Press the [ ] button to mute the sound.
Note:
• Pressing the [
] button again or adjusting
volume will unmute.
Adjust the Volume
Press the [ ] or [ ] button to increase or
decrease the volume level.
The adjustable range of volume is 0 to 40.
Playing Source Selection
Press the
[
]
button on the panel to show
main source menu.
Touch desired icon on the the screen to
enter corresponding working mode, such as
Disc, Navi, Radio, etc.
Drag left/right to scroll.
Note:
• When some devices are not ready, they cannot
be selected.
• You should stop switching when the playing
source you desired has been selected and wait
for some seconds, the unit will auto enter the
playing source mode you have selected.
When Vehicle is Put in Reverse
If the rear view video camera is connected, the
unit automatically switches to CAMERA source
during reverse driving. The unit returns to the
previous source after the vehicle has been taken
out of reverse.
When Parking Brake Applied
If 'PRK SW' cable is connected to hand brake
switch, the video display of the TFT monitor
will be controlled by driving status, system
setup and input video sources.
When the car is moving forward, and a video
source is being played, the screen will display
a warning disclaimer and a blank screen. The
warning screen will prevent the driver from
watching images.
Boot password
When power on first time, you should enter the
Boot password.
Default password is 0000.
You can change the password in the settings
menu. (General Settings -> Modify boot
password)
When changing the password, you should
input the old password first, then input a
new 4-digit password twice.
If you forget your password or you are
unable to login with your password,
please use the password: 8078
Customized
Press the [
] of the main menu.
Choose theme:
[Theme 1], [Theme 2].
(Theme 2 is the default theme)
Choose wallpaper:
[Live wallpapers]: to show the wallpapers with
animation stored in the unit. Drag up/down to
scroll.
[Photo]: to visit the photo of mobile storage.
[Wallpapers]: to show the wallpapers stored in
the unit. Drag left/right to scroll.
Select desired picture to view, touch [Set
wallpaper] to confirm selection.
Choose LOGO
Startup
