Blaupunkt HR10BT, Руководство пользователя

Страница: 12 / 64

Notes:
a. The Buzzer and FM radio are allowed to select as the alarm source. If you want to set up the FM radio as
alarm source, please press the “ 1” digit button in 3 seconds from remote control till the “ ON” show on
display in FM radio mode; then the current FM radio station will set as the alarm source. To cancel the FM
radio alarm source, please press the “1” digit button again till “ OFF” show on display. Then the Buzzer will
become the alarm source.
b. When the alarm is ring up, press any button on front panel or remote control can cancel the alarm sound.
c. On clock time mode, press and hold the Next button on front panel can turn off all alarm setting.
d. The duration of alarm sound is 2 minutes; and the alarm will wake up again after 5 minutes if there is no
further operation. There will repeat 2 times and off automatically in case of nobody in home.
e. When you set up the alarm, please make sure that you have set the clock time properly.
f. Please make sure the DC power is remained and connected with the unit. Otherwise, the alarm cannot
wake up. Please double check the time and alarm setting after you removed the DC power.
g. The alarm is workable on power off mode(display off ), but DC power should remain and connect with
unit properly.
FM radio operation
The unit built-in an antenna inside which allows you to listen the FM radio station. Before listen to the radio,
please try to move the unit next to window in order to get better radio signal.
Power on the unit, press the “M” button on the front panel of unit or press the “ MODE” button on remote
control can enter to radio mode.
1. Auto tune and preset: short press the “ FM SCAN” button, or press and hold “ PLAY/PAUSE” button from
remote control or front panel of unit in 3 seconds, the unit will scan and save the available station
automatically. The unit can save up to 50 preset stations.
2. Auto scan
：
Press and hold the “Previous” and ” Next” button on front panel of unit or remote control can
auto scan the available station in upward or downward frequency. The unit will stop and play the
available station automatically. Press the “ SAVE” button on remote control can save the current station.
3. Get a specific station: in order to get a specific frequency station, you can input the frequency directly
by the digit button on remote control. For example, you want to listen the radio frequency at “ 104.3
MHz”, you just need key in 1-0-4-3 by the digit button of remote control. Then the unit will skip and play
the defined station.
4. Preset station picking up: short press the “ Previous” or “ Next” button on remote control or front panel
can pick up the preset station; Or input preset station number by digit button on remote control for
picking up. For example, you want to listen the preset station number 12, please just key in 1-2 by remote
control, then the related station will be played.
USB and microSD card playback operation
Before start the MP3 playback function, please make sure the USB or microSD card has been inserted on USB
or microSD port of the unit rear panel. Also, the MP3 music has been copied and stored inside of device. The
unit can support up to 32GB capacity device.
1. Press the “MODE” or “ M” button enter to the USB or microSD card playback mode, the unit can auto detect
and start to play the music after show the total track's number.
2. Short press the “ Previous” or “ Next” button can select the last or next track; press hold and release the “
Previous” or “Next” button can fast-forward or fast-rewind the current playing track.
3. Key in the related number by the digit button on remote control can fast pick up and play the related
track.
4. Short press the “ REPEAT” button on remote control can switch the play mode between repeat all, repeat
one and random. Press and hold the “ M” key on front panel of unit 3 seconds can get the same operation.
5. If you want to repeat play a specific section of track, Press and hold the “ REPEAT” button 3 seconds till the
P—A show on display to select the start point ; then press and hold the “ REPEAT” button 3 seconds till
display show the P--b to select the end point; Then the unit will repeat play the selected track. Press and
hold the “ REPEAT” button till P---E showed on display can cancel and quit the specific repeat playing
function.
6. During the MP3 playback mode, short press the EQ button on remote control can change the equalizer
between NORMAL/ROCK/POP/CLASS/JAZZ/BASS.
10
HR10BT