49
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
CDC NAME Only available for CD chan-
ger playback (optional).
Use this function to name
your CDs. (See “Entering
CD names”).
LOUDNESS Loudness - When listening
at a low level, the Loudness
function creates a more nat-
ural sound by boosting the
low frequency range.
LOUD 1 - Low boost
LOUD 6 - Max. boost
TA VOL
To adjust the traffic an-
nouncement and warning
beep volume from between
0 to 63.
The message will then come
through at this volume, if the
standard volume is lower.
Should the standard volume
be higher than the TA VOL
level, then the traffic report
will be played slightly louder
than the standard volume.
SPEECH
In future many RDS radio
stations will differentiate be-
tween music and speech
programmes.
You can alter the tone for
speech programmes from
between “SPEECH 0 ... 4”.
SPEECH 0:
Music/speech off
SPEECH 1:
Linear reproduction (bass,
treble and Loudness set to
“0”)
SPEECH 2-4:
Different settings for vol-
ume, bass and treble with
the Loudness being switch-
ed off.
Try out which SPEECH set-
ting you like most.
BEEP
Acknowledgement tone for
all functions which require a
button to be pressed for
more than one second.
The volume can be adjusted
from between 0 to 9. (0 =
off).
ANGLE
Use this setting to alter the
viewing angle to your liking
from -1 to 0 to +1.
BRIGHT
You can adjust the display
brightness from between 1
to 16. You can also select
different values for day and
night.
Selecting the night bright-
ness:
Switch on the vehicle lights
and programme the bright-
ness value. The car radio’s
lighting connector must be
hooked up to the vehicle’s
electric system for this to
function properly.
COLOUR
(Variocolour) For gradually matching the
radio illumination with the
dashboard lighting.
green .............. light orange ................. red
Heidelbg RCM126 gb®
07.06.2002, 12:46 Uhr
49
