DEVICE-SPECIFIC SAFETY INSTRUCTIONS
Pay attention when walking backwards. Danger of stumbling!
The cutting tool will continue to rotate even after the engine has been
switched off.
Risk of injury caused by the cutting blades! After pulling out a new
thread, always keep the machine in the normal working position before
switching on.
Ensure that the ventilation slots are kept free from dirt.
Never mount metal cutting elements.
Children should be supervised to ensure that they do not play with the
device.
If the power cable of this device is damaged, it may only be replaced by
the manufacturer, their customer service operation, or a similarly qualified
person,in order to prevent risks.
Remember that moving parts may also be located behind ventilation and
venting slots.
Symbols affixed to your tools may not be removed or covered. Information
on the device that is no longer legible must be replaced immediately.
SYMBOLS
Read the operating manual before using the device
Be careful when handling the device! Observe all safety
instructions in the instructions for use!
Disconnect the mains plug before all cleaning and maintenance
work.
If the mains cable is damaged, pull out the plug.
Pull out the power plug before conducting any maintenance
work on the device.
Do not expose the machine to moisture.
SYMBOLS
Danger of injury from flying parts!
Always maintain a sufficiently safe distance.
Keep unauthorised persons away from the area you are
working in.
Ensure a 15 m gap to other people and animals
Wear safety goggles/ Wear ear defenders
Wear protective gloves/Wear safety shoes
SCOPE OF DELIVERY
- Operating manual
- Lawn strimmer
- Protective hood
Note: If any one of the parts is missing or damaged contact the retailer.
- P. 4, item 2a, 2b, 2c, 2d, 2e, 2f, 2g, 2h
Insert the individual parts of the appliance together and tighten them
with screws (8).
- P. 4, item 3
Use screws (9) to screw the protective (4) hood to the trimming head.
Remove the transportation protection mechanism from the cutting
blade (10).
9
10
