Blaupunkt CRP9BK, Руководство пользователя

Страница: 7 / 52

E
N
G
L
IS
H
1. Place your clock face down on a flat and soft surface.
2. Slide and remove the battery cover at the back of your unit.
3. Insert 2 x new AAA batteries into the battery compartment by observing the correct “+”
and “-“ polarity.
4. Slide and replace the battery cover.
Remarks:
Do not mix old and new batteries.
Do not mix alkaline, standard or rechargeable batteries.
Alkaline batteries are recommended for optimal usage of this clock.
If the unit is not to be used for a prolonged period, such as a month or longer, remove the
batteries to prevent possible corrosion. Should the battery compartment become corroded or
dirty, clean the compartment thoroughly and replace the batteries.
If AC power is interrupted and backup batteries are being used : the projection, radio, always-
on backlight function will disable. The time and all settings of your unit will be kept and wake-
to-radio alarm will be replaced by wake-to-buzzer alarm.
TO SET TIME, 12/24-HR TIME, CALENDAR AND SNOOZE DURATION
1. Press and hold SET/ AL SET, the hour digits flash. Press or to set the hours. Press and
hold or will accelerate setting at high speed.
2. Press SET/ AL SET once again, the minute digits flash. Press or to set the minutes.
Press and hold or will accelerate setting at high speed.
3. Press SET / AL SET once again: 24Hr flash, press or to select 12Hr 24Hr. In 12Hr
mode, PM will appear on the display to indicate afternoon time. There is no AM indicator.
4. Press SET/ AL SET once again, the year 2015 flash. Press or to set to the current year.
5. Press SET/ AL SET once again, the month digits flash. Press or to set to the current
month.
6. Press SET/ AL SET once again, the date digits flash. Press or to set to the current
date.
7. Press SET/ AL SET once again, 05 flash. Press or to set the snooze duration (from 5
min to 60 min.).
8. Press SET/ AL SET again to complete set-up. If no key is pressed in approximate 10
seconds at any time during set-up, the clock will exit the set-up mode.
Remark: the calendar must be set correctly to current date / month / year to enable the
weekdays / weekends alarm work properly.
TO SET ALARM 1
1. At normal time display, press SET / AL SET once, default alarm time 6:00 and A1 appear.
2. Press and hold SET/ AL SET until the hour digits flash. Press or to set the desired hour.
Press and hold or to accelerate setting at high speed. PM will appear on the display to
indicate afternoon time if 12-Hr format is selected. There is no AM indicator.
3. Press SET/ AL SET once again, the minute digits flash. Press or to set desired minutes.
Press and hold or to accelerate setting at high speed.
4. Press SET/ AL SET once again, LCD displays “bu” (buzzer)., Press or to select the wake-
up sound sources :-
bu = Buzzer
rd = Radio
5. Press SET / AL SET once again, “ 1-7 ” flashes, Press or to select “ 6-7 ” or “ 1-5 ” or “ 1-1 ”.
1-5 = Monday to Friday (alarm by working day)
6-7 = Saturday and Sunday (alarm by weekend).
1-7 = Monday to Sunday (alarm by weekly).
1-1 = alary by single day, after stopped the alarm, user need press AL 1.2/ON.OFF once to
re-active another single day alarm.
CRP9BK
5