Blaupunkt CR11 Edition, Руководство пользователя

Страница: 9 / 54

E
N
G
L
IS
H
7
Listen to FM radio
1. To turn on the radio, press MODE/SLEEP once, the display shows “ rd ” and then the radio
frequency readings in Mhz.
2. Press / button to tune the radio to a desired station, the radio frequency will
increase of decrease 0.1MHz per step. Press and hold or to scan the available strong
station.
3. To adjust the volume, press
VOL once, the display shows “L10”, p ress or to adjust
volume from L00 (no sound) to L15 (maximum) . Press VOL to store the volume setting.
4. Press to turn off the radio.
5. To check the current FM radio frequency, please short press MODE/SLEEP button. The
radio will show “ RD”, then the current radio frequency.
Remark: keep your radio away from fluorescent lamps or other electronic devices, which may
cause interference to the radio.
Radio preset operation
In radio mode, the unit allows you to preset your favorite stations and access them quickly.
The radio can preset 10-station maximum.
1. Turn on the radio and select a radio station you like to memorize.
2. Press and hold the
SET until “ MEM ” appears and “ 01 ” flashes. Press SET once to store
preset 1 station.
3. Press or to select another station you like to memorize. Then press and hold
SET
until “ MEM ” appears and “ 01 ” flashes. Press or to select and adjust the preset
station number location which you want to save, press SET once to confirm the preset
station.
4. Repeat Step 2 to 3 to set up other preset station.
5. To pick up the preset station, please short press the
SET button. The radio will show the
preset station number and play automatically.
6. To edit a preset station, select another station and then repeat Step 2 to 4. This can
override the original settings.
Note : the preset station information can keep only when the unit connects with DC/AC power
adaptor, or the backup battery power was installed. Please double check and set up the preset
station in case of you cut off the power.
To play the nature sounds
1. In standby mode( the display shows time information without sound output).
Press
MODE/SLEEP twice, to select “Birds”, the display shows “N1”
Press MODE/SLEEP third, to select “River”, the display shows “N2”
Press MODE/SLEEP fourth, to select “Chime”, the display shows “N3”
Press MODE/SLEEP fifth, to select “Ocean”, the display shows “N4”
2. When nature sound is being played, press VOL once, the display shows” L02 ”, press or
to adjust volume from “ L01 ” (lowest) to “ L03 ” (highest)
3. When nature sound is being played, press once to turn off the Nature Sound.
Sleep operation
1. When the radio or nature sound is being played, press and hold MODE/SLEEP to enter
the sleep mode. The SLEEP and the sleep time “ 05 ” (5 minutes) appear on the display.
2. Press the MODE/SLEEP again as needed to adjust the sleep timer from 5, 10, 15, 30, 45, 60,
75, 90, 120 or OFF .
3. When the display reverts to time display, press and hold MODE/SLEEP once to show the
sleep time remaining.
4. The radio or nature sound will remain active for the programmed sleep time and then shut
off automatically.
CR11 EDITION